northern pride
Coltivazione Cannabis
I don't know where they get that crap about it finishing Sept. 1st. I was at 44 something degrees north, and
they didn't finish until about the end of September. I do remember that there was a lot of variation between
seeds, maybe I just got some slow ones. Or maybe they were just lying too.” –been there
They're funny plants when it comes to cuttings. They seem to be much slower to take than most, but the huge
amount of vigor that is inherent in the breed means that the cuts don’t die- they just hang around and don't
do much. I took cuttings of my over-wintering mother which took about Himalayan Gold Feminized Potsmokersnet 3 weeks to take- during this time, the
cuts didn’t look ill, and didn’t grow, they just 'existed'. The mother plant doesn’t do well indoors- mine seemed
to get freaked out and started to flower. It flowered though most of winter, then suddenly decided to revert, I
don’t know why.
Modification of Petrzilka's process (BF3oEt20/MgS04) by
Razdan et al
Seeds Online Cannabis Cannabis garden magic This was
sensis
clinically confirmed by Sallan and sensis
feminized garden magic co-workers? in 1975
Ed Rosenthal says Early Pearl came from the Midwest, but was a cross of Early Girl and Polly, an early
California sativa.
”
“I've grown WWWCANABIS SATIVA this both inside and out. If you do a search, you'll probably find some previous posts that I’ve
written on this type; In brief, it is effectively pure sativa (though actually has early girl crossed in, very
recessive in all respects). Inside and out, it likes to grow large. Stretch continues right through flowering, which
was a respectable 8 weeks (the only virtue carried over from early girl). Buds are thin, green, sweet and sharp
smell, very good sativa high- quite psychoactive hempdepot (trippy?). Little paranoia, very long high. Unless you grow very
big plants, yield is low, as could be expected from such a plant. At Seeds News Seeds News Seeds present I'm having great trouble with my EP
mother- it has decided to auto-flower.
After re-potting the 10-inch plant into a 1.75 gallon container,
re-vegging started, but now it looks like it's going to go back into flower again (this is on 24/0). Root mass is
HUGE.” – retro13
"I got NL#5 never had any problems with cloning, also if its real NL#5 (which is Pure NL) it has almost no smell
at all which is great if ya grow indoors.
The ones I've seen really fill out at the end of the flowering cycle, it
sometimes looks like the yield will be marginal and then in the last couple of weeks--bam! I have
How Marijuana Marijuana Grow Marijuana From found this
with most indica strains, usually they do not fill out till the last 2-3 weeks of flowering. NL is a great indoor
strain, one of my fav's too." -Unknown"I got NL5 never had any problems with cloning, also if its real NL5 (which is Pure NL) it has almost no smell
at all which is great if ya grow indoors.
The
Seedsofpassion ones I've seen really fill out at the end of the flowering cycle, it
sometimes looks like the yield will be marginal and then in the last couple of weeks--bam! I have found this
with most indica strains, usually they do not fill out till the last 2-3 weeks of flowering. NL is a great indoor
strain, one of my fav's too." -Unknown
I would have to say to give Blueberry a shot. I received mine from BC Seeds, WOW. I used to grow with stash
seeds. No more. Blueberry in 65 days budding time produced 1.8 Oz per s.f., with 55 watts per s.f., vented
highly. The strength and the taste were a 10 on 1-10 with skunk #1 being a 5.
s are well mixed in the spore
syringe. Often, it takes several tries to get the spores fully broken apart
and well mixed.
If the spores in the print have been dried and are not fresh, it is best to
wait six hours to use the spore syringe. The spores need to rehydrate. If
your in a hurry, the spores can still rehydrate in the culture jars.
How to Make a Spore Print
Once you have a mature mushroom, you are in a position to make a
spore print and use it to continue cultivation of mushrooms. The cap
should be harvested when the mushroom cap has become flat or is
starting to invert.
Sterility is key. Adaptation-25 Be careful not to do anything that will
compromise the sterility of your spore print. The typical procedure is
to cut the stalk off of a mature mushroom very close to the cap. A
sterilized knife or razor blade is used to do this. The cap is then laid on
a sterile piece of tissue paper or card stock and a small glass set over it.
The glass is needed for two reasons. First, it keeps the spore print
insulated from airborne contaminates. Secondly, it helps keep the
humidity high so the mushroom cap can continue to live and drop its
spores. One note of caution. Some humidity usually needs to be
(10 of 15) 5/1/2002 6:54:20 PM]
How To Grow Magic Mushrooms The Magic Mushroom Growers Guide (page 3)
allowed to escape. You want the environment inside the glass to be
slightly less humid than the environment in which the mushroom was
grown. If you have problems getting a cap to drop its spores, try using
a piece of paper for the print that fits entirely inside the glass and
spreading out a wash cloth flat on the table. Let the edge of the glass
seal to the wash cloth instead of the paper. This will usually allow
enough humidity to escape to cause the cap to drop spores.
If everything goes well, after a day or two the cap will drop its spores.
Adaptation-26 There will be a purple-brown dust underneath the cap.
These are the spores.
Eye glass lens paper is good source of sterile tissue paper. A box of
waxy tissue paper that deli's use to pick up donuts and rolls is another
excellent source of sterile tissue paper. Card stock (such as a recipe
card) is a bit easier to use later when you want to prepare a spore
syringe, but you have to expend the extra effort up front to sterilize it.
To use card stock, place in a 425 degree F. oven for 15 minutes. Let it
cool with a glass over it before you place the cap on it.
Once you have a spore print on the paper, remove the glass and cap.
Fold the spore print in half and seal the edges so air can not get in. A
piece of scotch tape on each side will do nicely. The spores will stay
viable for 18 months if they are kept in a cool, dry and dark spot. If
you place a small amount of desiccant in the bottom of a film container
and place a cotton ball on top of the desiccant, you have an ideal
container to keep the spore print. The cotton ball will keep the
desiccant from touchi
I would have to say to give Blueberry a shot. I received mine from BC Seeds, WOW. I used to grow with stash
seeds.
No more. Blueberry in 65 days budding time produced 1.8 Oz per s.f., with 55 watts per s.f., vented
homegrown fantaseeds highly. The strength and the taste were a 10 on 1-10 with skunk #1 being a 5.I would have to say to give Blueberry a shot. I received mine from BC spiceoflifeseeds Seeds, WOW. I used to grow with stash
seeds. No more. Blueberry in 65 days budding time produced 1.8 Oz per s.f., with 55 watts per s.f., vented
Cannabis highly. The strength and the taste were a 10 on 1-10 with skunk 1 being a 5.
“Northern lights #2 = originally a Hindu Kush X Thai cross. It was selectively inbred and developed into a stable
almost all Kush type cross that is mostly indica.”
“I haven't done #5, but # 2 (Oasis) was great. Most people say that the NL strains have little or no taste or
smell, but my experience with #2 was that it had an oniony, garlicky smell and taste.
The buzz was it.
Couch-lock, but surprisingly psychoactive, given indica's reputation. I don't think you can go wrong with a strain
that highly touted.” - Skunkman“Northern lights
Dutchpassion Hanf 2 = originally a Hindu Kush X Thai cross. It was selectively inbred and developed into a stable
almost all Kush type cross that is mostly indica.”
“I haven't done 5, but 2 (Oasis) was great. Most people say that the NL strains have little or no taste or
smell, but my experience with 2 was that it had an oniony, garlicky smell and taste. The buzz was it.
Couch-lock, but surprisingly psychoactive, given indica's reputation. I don't think you can go wrong with a strain
that highly touted.” - Skunkman
While the 5-HT precursors tryptophan and 1-5-HTP cause an increase in serum prolactin concentration, a combination of 1-5-HTP with a peripheral decarboxylase inhibitor was found to reduce the serum prolactin concentration. This combination seemed to behave like a DA agonist. This effect is not produced by the decarboxylase inhibitor per se. A possible explanation is that 5-HTP is converted to 5-HT in CA-ergic neurons, that 5-HT supersedes the CA from the stores, and that some of the CA reach the synaptic cleft and stimulate CA receptors. Another possible explanation is that 5-HTP decarboxylase is centrally inhibited as well, and that an effect of 5-HTP itself is involved here. In view of the observations made it is doubtful whether the therapeutic effect of 5-HTP combined with a peripheral decarboxylase inhibitor in depressions and myoclonus can in fact be atributed to activation of central serotonergic systems.
"Regarding Early Girl, Ed Rosenthal says he knows (it was) developed by Cultivators' Choice in California in the
70's.”
“Early Girl - This is a mostly Indica early variety developed in Northern California. The plants are compact and
very sturdy, and will tend to grow to one main stem. Very potent, medium yield, with a hashy taste and aroma.
Inbred for 4 generations and carefully selected for quality and earliness. Early Girl is an outstanding choice for
growers seeking an early Indica-type.
“BC Big Bud is a stabilized 65% indica/35% sativa, the Dutch Big Bud (Sensi) is all indica. BC Big Bud has
tremendous resin, its the crystally bud on the cover of the Cannabis Culture #18 (Steve Kubby header), and a
citrusy scent. Usually only available in clone, (hence the crosses, its usually the female in those Romulan x BC
Big Bud or Mikado x BC Big Bud), it is now available in seed (pure) at $50 CN/$40 US for 10 seeds. Giant seeds,
largest I have (not that that information has meaning, seed size has no relevance despite what mythology
persists about them). Very nice smoke, the Dutch Mr Nice Big Bud can be a good yielder like BC Big Bud but the high is
superior in the BC Big Bud version. The leaves in the BC Big Grapefruit Bud Description Bud variety are more sativa like.
” – Marc Emery“BC Big Bud is a stabilized 65% indica/35% sativa, the Dutch Big Bud (Sensi) is all indica. BC Big Bud has
tremendous resin, its the crystally bud on the cover of the Cannabis Culture 18 (Steve Kubby header), and a
citrusy scent.
Usually only available in
shivas
clone, (hence the crosses, its usually the female in those Romulan x BC
Big Bud or Mikado x BC Big Bud), it is now available in seed (pure) at $50 CN/$40 US for 10 seeds. Giant seeds,
largest I have (not that that information has meaning, seed size has no relevance despite what mythology
persists about them). Very nice smoke, the Dutch Big Bud can be a good yielder like BC Big Bud but the high is
superior in the BC Big Bud version. The leaves in the BC Big Bud variety are more sativa like.” – Marc Emery Green Spirit is a hybrid of Big Bud and Skunk #1. Was developed because Big Bud itself is not a very
consistent strain, with very big differences among individual plants. By crossing Big Bud and Skunk #1, Green
Spirit became quite homogeneous. Good results under artificial lights. Clear and strong high. The plants have
an explosive flowering trait and are extremely resinous. Very high yield.
Most of the plants I grew with seeds bought in November are about 45" tall, but I bend then over almost in half
so they are only about 26" high not including the rockwool. I get lots of various size buds that are pointy on
top when fully mature, with a long top branch of buds about a 18” long that you could call a spread-out cola.
One plant I pruned in veg. Toped at the 4th node than again a week later. It created 4 main colas with only 4
or 5 side branches.. It is just about ready. It will be less than 30” mature (not bent at all) and very compact
not as wide) compared to the other Super Silver Hazes (and much easier to manage). For SOG, you would need
to be a master at controlling the growth patterns. But if you know how, you could get (4) four cola Super Silver
Hazes per Sq. foot, or at least 3 that could yield at least 22 grams of dry manicured bud. ime for any other
questions. If and only if we remember two methodological qualifications will our analysis
of the responses be meaningful:
1. The form of the study instrument—open-ended or forced choice—gives us results
that are superficially different (the magnitude of the responses, for instance), but
fundamentally the same (the order of the responses).
2. Individuals who do not mention a given effect on our open-ended question are not
thereby automatically agreeing that marijuana does not have that effect on
them—they just did not think of it at that moment in that situation ( although we do
have a certain amount of confidence that those who did not mention the effect were
(10 of 34)4/15/2004 1:07:27 AM
The Marijuana Smokers - Chapter 7
less likely to experience it than those who did mention it).
Overviewing the responses elicited, we see that there are over 200 totally distinct
effects described. (We have presented only those which ten or more subjects mentioned;
there are almost 150 effects each of which was mentioned by fewer than ten respondents.)
Sixty-four of these were proffered by single individuals, completely idiosyncratic
responses that could not in any way be classified with other responses which were
somewhat similar. For instance, one individual said that she had the feeling of "being
sucked into a vortex." Another reported more regular bowel movements while intoxicated.
A third said that she could feel her brains dripping out of her ears. In addition to the sixtyfour
unique and therefore totally unclassifiable responses, there were twenty-eight where
only two respondents agreed that marijuana had that effect on them. However valid these
responses might be to the individual himself, they are not useable to us, since they are still
quite idiosyncratic.
Although the diversity of the responses was in itself an interesting finding, the picture
was not totally chaotic. Each individual offered an average of roughly ten different effects
of the drug as a description of the high. Some of these effects were offered independently
by a large percentage of the interviewees although, curiously, none attracted a majority;
every effect described was given by a minority of the sample. That is, in spite of the huge
diversity in the responses, some agreement prevailed.
Marijuana users seem to describe the effects of the drug in overwhelmingly favorable
terms. Certainly the vast majority of the effects mentioned would be thought positive if
the judge did not know that marijuana touched off the state in question. Let us suppose
that we have been told that the list characterizes how some people react to a warm spring
day; our sense would be that they think well of its effects. Thus, most of the
characteristics of the marijuana high, as described by its users, would be looked at as
beneficial. Yet with the knowledge that the triggering agent was marijuana, the judge
reinterprets his favorable opinion and decides
s are well mixed in the spore
syringe. Often, it takes several tries to get the spores fully broken apart
and well mixed.
If the spores in the print have been dried and are not fresh, it is best to
wait six hours to use the spore syringe. The spores need to rehydrate. If
your in a hurry, the spores can still rehydrate in the culture jars.
How to Make a Spore Print
Once you have a mature mushroom, you are in a position to make a
spore print and use it to continue cultivation of mushrooms. The cap
should be harvested when the mushroom cap has become flat or is
starting to invert.
Sterility is key. Adaptation-25 Be careful not to do anything that will
compromise the sterility of your spore print.
The typical procedure is
to cut the stalk off of a mature mushroom very close to the cap. A
sterilized knife or razor blade is used to do this. The cap is then laid on
a sterile piece of tissue paper or card stock and a small glass set over it.
The glass is needed for two reasons. First, it keeps the spore print
insulated from airborne contaminates.
Secondly, it helps keep the
humidity high so the mushroom cap can continue to live and drop its
spores. One note of caution. Some humidity usually needs to be
(10 of 15) 5/1/2002 6:54:20 PM]
How To Grow Magic Mushrooms The Magic Mushroom Growers Guide (page 3)
allowed to escape.
You want the environment inside the glass to be
slightly less humid than the environment in which the mushroom was
grown. If you have problems getting a cap to drop its spores, try using
a piece of paper for the print that fits entirely inside the glass and
spreading out a wash cloth flat on the table.
Let the edge of the glass
seal to the wash cloth instead of the paper. This will usually allow
enough humidity to escape to cause the cap to drop spores.
If everything goes well, after a day or two the cap will drop its spores.
Adaptation-26 There will be a purple-brown dust underneath the cap.
These are the spores.
Eye glass lens paper is good source of sterile tissue paper. A box of
waxy tissue paper that deli's use to pick up donuts and rolls is another
excellent source of sterile tissue paper. Card stock (such as a recipe
card) is a bit easier to use later when you want to prepare a spore
syringe, but you have to expend the extra effort up front to sterilize it.
To use card stock, place in a 425 degree F. oven for 15 minutes. Let it
cool with a glass over it before you place the cap on it.
Once you have a spore print on the paper, remove the glass and cap.
Fold the spore print in half and seal the edges so air can not get in. A
piece of scotch tape on each side will do nicely. The spores will stay
viable for 18 months if they are kept in a cool, dry and dark spot. If
you place a small amount of desiccant in the bottom of a film container
and place a cotton ball on top of the desiccant, you have an ideal
container to keep the spore print. The cotton ball will keep the
desiccant from touchis are well mixed in the spore
syringe. Often, it takes several tries to get the spores fully broken apart
and well mixed.
If the spores in the print have been dried and are not fresh, it is best to
wait six hours to use the spore syringe. The spores need to rehydrate.
If
your in a hurry, the spores can still rehydrate in the culture jars.
How to Make a Spore Print
Once you have a mature mushroom, you are in a position to make a
spore print and use it to continue cultivation of mushrooms. The cap
should be harvested when the mushroom cap has become flat or is
starting to invert.
Sterility is key. Adaptation-25 Be careful not to do anything that will
compromise the sterility of your spore print. The typical procedure is
to cut the stalk off of a mature mushroom very close to the cap. A
sterilized knife or razor blade is used to do this. The cap is then laid on
a sterile piece of tissue paper or card stock and a small glass set over it.
The glass is needed for two reasons. First, it keeps the spore print
insulated from airborne contaminates. Secondly, it helps keep the
humidity high so the mushroom cap can continue to live and drop its
spores. One note of caution. Some humidity usually needs to be
(10 of 15) 5/1/2002 6:54:20 PM]
How To Grow Magic Mushrooms The Magic Mushroom Growers Guide (page 3)
allowed to escape. You want the environment inside the glass to be
slightly less humid than the environment in which the mushroom was
grown. If you have problems getting a cap to drop its spores, try using
a piece of paper for the print that fits entirely inside the glass and
spreading out a wash cloth flat on the table. Let the edge of the glass
seal to the wash cloth instead of the paper. This will usually allow
enough humidity to escape to cause the cap to drop spores.
If everything goes well, after a day or two the cap will drop its spores.
Adaptation-26 There will be a purple-brown dust underneath the cap.
These are the spores.
Eye glass lens paper is good source of sterile tissue paper. A box of
waxy tissue paper that deli's use to pick up donuts and rolls is another
excellent source of sterile tissue paper. Card stock (such as a recipe
card) is a bit easier to use later when you want to prepare a spore
syringe, but you have to expend the extra effort up front to sterilize it.
To use card stock, place in a 425 degree F. oven for 15 minutes. Let it
cool with a glass over it before you place the cap on it.
Once you have a spore print on the paper, remove the glass and cap.
Fold the spore print in half and seal the edges so air can not get in. A
piece of scotch tape on each side will do nicely. The spores will stay
viable for 18 months if they are kept in a cool, dry and dark spot. If
you place a small amount of desiccant in the bottom of a film container
and place a cotton ball on top of the desiccant, you have an ideal
container to keep the spore print. The cotton ball will keep the
desiccant from touchis are well mixed in the spore
syringe. Often, it takes several tries to get the spores fully broken apart
and well mixed.
If the spores in the print have been dried and are not fresh, it is best to
wait six hours to use the spore syringe. The spores need to rehydrate. If
your in a hurry, the spores can still rehydrate in the culture jars.
How to Make a Spore Print
Once you have a mature mushroom, you are in a position to make a
spore print and use it to continue cultivation of mushrooms. The cap
should be harvested when the mushroom cap has become flat or is
starting to invert.
Sterility is key. Adaptation-25 Be careful not to do anything that will
compromise the sterility of your spore print. The typical procedure is
to cut the stalk off of a mature mushroom very close to the cap. A
sterilized knife or razor blade is used to do this. The cap is then laid on
a sterile piece of tissue paper or card stock and a small glass set over it.
The glass is needed for two reasons. First, it keeps the spore print
insulated from airborne contaminates. Secondly, it helps keep the
humidity high so the mushroom cap can continue to live and drop its
spores. One note of caution. Some humidity usually needs to be
(10 of 15) [5/1/2002 6:54:20 PM
How To Grow Magic Mushrooms The Magic Mushroom Growers Guide (page 3)
allowed to escape.
You want the environment inside the glass to be
slightly less humid than the environment in which the mushroom was
grown.
If you have problems getting a cap to drop its spores, try using
a piece of paper for the print that fits entirely inside the glass and
spreading out a wash Himalayangoldsativa cloth flat on the table. Let the edge of the glass
seal to the wash cloth instead of the paper. This will usually allow
enough humidity to escape to cause the cap to drop spores.
If everything goes well, after a day or two the cap will drop its spores.
Adaptation-26 There will be a purple-brown dust underneath the cap.
These are the spores.
Eye glass lens paper is good source of sterile tissue paper. A box of
waxy tissue paper that deli's use to pick up donuts and rolls is another
excellent source of sterile tissue paper. Card stock (such as a recipe
card) is a bit easier to use later when you want to prepare a spore
syringe, but you have to expend the extra effort up front to sterilize it.
To use card stock, place in a 425 degree F. oven for 15 minutes.
Let it
cool with a glass over it before you place the cap on it.
Once you have a spore print on the paper, remove the glass and cap.
Fold the spore print in half and seal the edges so air can not get in. A
piece of scotch tape on each side will do nicely. The spores will stay
viable for 18 months if they are kept in a cool, dry and dark spot. If
you place a small amount of desiccant in the bottom of a film container
and place a cotton ball on top of the desiccant, you have an ideal
container to keep the spore print. The cotton ball will keep the
desiccant from touchis are well mixed in the spore
syringe. Often, it takes several tries to get the spores fully broken apart
and well mixed.
If the spores in the print have been dried and are not fresh, it is best to
wait six hours to use the spore syringe. The spores need to rehydrate. If
your in a hurry, the spores can still rehydrate in the culture jars.
How to Make a Spore Print
Once you have a mature mushroom, you are in a position to make a
spore print and use it to continue cultivation of mushrooms. The cap
should be harvested when the mushroom cap has become flat or is
starting to invert.
Sterility is key. Adaptation-25 Be careful not to do anything that will
compromise the sterility of your spore print. The typical procedure is
to cut the stalk off of a mature mushroom very close to the cap. A
sterilized knife or razor blade is used to do this. The cap is then laid on
a sterile piece of tissue paper or card stock and a small glass set over it.
The glass is needed for two reasons. First, it keeps the spore print
insulated from airborne contaminates. Secondly, it helps keep the
humidity high so the mushroom cap can continue to live and drop its
spores. One note of caution. Some humidity usually needs to be
(10 of 15) 5/1/2002 6:54:20 PM
How To Grow Magic Mushrooms The Magic Mushroom Growers Guide (page 3)
allowed to escape. You want the environment inside the glass to be
slightly less humid than the environment in which the mushroom was
grown. If you have problems getting a cap to drop its spores, try using
a piece of paper for the print that fits entirely inside the glass and
spreading out a wash cloth flat on the table. Let the edge of the glass
seal to the wash cloth instead of the paper. This will usually allow
enough humidity to escape to cause the cap to drop spores.
If everything goes well, after a day or two the cap will drop its spores.
Adaptation-26 There will be a purple-brown dust underneath the cap.
These are the spores.
Eye glass lens paper is good source of sterile tissue paper. A box of
waxy tissue paper that deli's use to pick up donuts and rolls is another
excellent source of sterile tissue paper. Card stock (such as a recipe
card) is a bit easier to use later when you want to prepare a spore
syringe, but you have to expend the extra effort up front to sterilize it.
To use card stock, place in a 425 degree F. oven for 15 minutes. Let it
cool with a glass over it before you place the cap on it.
Once you have a spore print on the paper, remove the glass and cap.
Fold the spore print in half and seal the edges so air can not get in. A
piece of scotch tape on each side will do nicely. The spores will stay
viable for 18 months if they are kept in a cool, dry and dark spot. If
you place a small amount of desiccant in the bottom of a film container
and place a cotton ball on top of the desiccant, you have an ideal
container to keep the spore print. The cotton ball will keep the
desiccant from touchi
This hybrid is the pinnacle of achievement in Cannabis breeding today. The result:
seed marijuana
an extremely potent
seed marijuana
plant
with a seed marijuana great Sativa high. In the 1994 harvest festival
Cannabisseeds this variety was miles ahead of its competitors. The high
yields
Big Bud Super Skunk compensate for the slightly longer flowering period. Hybrid vigour provides for lush growth, heavy bud
formation and abundant
seed marijuana resin.
A true champion! Bubble is available for 150 NLG and has 22 seeds. This has to do with low
germination rates at the last tests and making up for that. I don't know
the one Adam sells personally, but do know that they derive from the same
genetic background. It took a while before I was pleased with the product
and there was also a personal thing involved, with the person who brought
the genetics over to Holland. I waited till that was resolved to
satisfaction." - Simon, owner of Serious Seeds, Amsterdam Blow-by-blow description of the generations:
P.50 = Heavy, single-cola type plants with mellow high (too much influence from the ShivaSkunk) Sweet fruity
scent/flavor. Unstable in most traits - for example, 10 days difference in fastest/slowest maturation period in a
group of 20 seedlings.
P.75 = Plants leaning MUCH more in the direction of Princess in floral cluster and bud structure, scent/flavor
turned more "tropical" like pineapple. The stability was becoming better - two major phenotypes; short & dense
(potent too) or tall/HUGE (Not so potent).
P.88 = Renamed Cinderella 88 when first released on the market. It grows fast and produces excellent yields of
FROSTY buds in 7 weeks! Generally uniform seedlings with minor differences in floral formation and some height
variance, but the smoke is quite consistent from all plants - Dense, heavy nuggets of fruity scented & flavored
(like wild berries) and covered in resin glands, the dried buds have distinctly ORANGE pistils. Medical: multiple sclerosis “This state of the art Indica is the result of over 20 years of select inbreeding. Bred
for vigorous growth, high yield, and superb high. A must for growers who prefer short bushy plants. The buds
have an extremely frosted, resinous appearance and the yield is high.
"NL#5 is NL with another plant crossbred. Part indica, part sativa. Grows great outdoors, flowers quickly and has
a pretty good yield. I know a few that have grown it. Call it the "Christmas tree" bud, the plant looks like one..
Thumbs up to it, it is a great strain." -V
cannabis pictures -- 3/12/2010 4:14:58 PM
mr nice
While the 5-HT precursors tryptophan and 1-5-HTP cause an increase in serum prolactin concentration, a combination of 1-5-HTP with a peripheral decarboxylase inhibitor was found to reduce the serum prolactin concentration. This combination seemed to behave like a DA agonist. This effect is not produced by the decarboxylase inhibitor per se. A possible explanation is that 5-HTP is converted to 5-HT in CA-ergic neurons, that 5-HT supersedes the CA from the stores, and that some of the CA reach the synaptic cleft and stimulate CA receptors. Another possible explanation is that 5-HTP decarboxylase is centrally inhibited as well, and that an effect of 5-HTP itself is involved here. In view of the observations made it is doubtful whether the therapeutic effect of 5-HTP combined with a peripheral decarboxylase inhibitor in depressions and myoclonus can in fact be atributed to activation of central serotonergic systems. containing this alkaloid is not difficult to
perform and is perhaps one of the most rewarding alchemical processes that one
can attempt. The chemicals required for this process are readily available and
their purchase arouses no suspicion or interest on the part of Government
agencies. The equipment employed is not expensive or particularly complicated
or can be constructed very easily from ordinary household items. The entire
process can be carried out in any kitchen in the matter of hours by following the
instructions below and in the final stages one can verify the success of the
procedure by actually watching the crystals of mescaline precipitate in the
solution. One kilo (2.2 lbs) of dried peyote buttons may yield between 10 and 60
grams of pure white needle crystals of mescaline depending on the potency of
the plants used. On average the yield is about 20 grams. The usual underground
price of a kilo of dried peyote ranges between $125 and $250 (25 to 50 cents per
button). From indians in the southwestern USA the price is closer to $50 (10
cents per button). The street price for a gram of pure mescaline is $20 to $30 - if
one is lucky enough to find it. One can obtain from a kilo of dried peyote $200 to
$1200 worth of mescaline. If San Pedro is employed on may anticipate a yield of
3 to 12 grams of mescaline per kilo of dried cactus. One can legally purchase a
kilo of dried San Pedro for $5 to $10 and from it extract $60 to $250 worth of pure
mescaline.
Grind a kilo of the dried cactus, place this in a large pressure cooker, cover with
distilled water, and boil for 30 minutes. Strain the liquids and save them. Return
the pulp to the pot, add more water and boil again for 30 minutes. Strain the
liquids and combine them with the first strainings. Repeat this process about five
times or until the pulp no longer has a bitter taste. Discard the pulp and reduce
the volume of the combined strainings by boiling in an open pot. Do not use
aluminum ware. When the liquids have been concentrated to the thickness of
cream (about one quart), stop the boiling and stir in 400 grams of sodium
hydroxide (lye). This makes the mescaline more soluble in benzene and less in
water. If a large separatory funnel is available pour the liquids into it and add
1600 ml of benzene. Shake the funnel well for five minutes and let it stand for two
hours. If a separatory funnel is not available the process can be carried out in a
one gallon jug with a siphon attached.
After standing for 2 hours the water layer will settle to the bottom and the
benzene layer will float to the top. Between the two layers will be a thin emulsion
layer of mixed water and benzene. Drain off the water and emulsion layers if you
are using a separatory funnel or siphon off the benzene layer if you are using the
makeshift jug-siphon apparatus. Be certain that neither the water or emulsion
layers get into the benzene layer when separating. If any of these layers d "We have been working Plantation De Cannabis from a m39 mother plant that is from 1987. This is absolutely the most powerful strain
I have ever come across. I have purchased & grown many of the
strainbase
newer bragged on strains and still am looking
for something that will even come close to this strain. I'm not saying that this variety is the most potent, just
that in my over 15 yr. search this is what I've found to be the strongest so far."-Clone
"M39 by SSSC was "Basic#5"/Sk#1, but I BELIEVE "Basic#5" was actually NL#5, but SSSC weren't allowed to say
so. You're actually looking for NL#5/Sk#1 which is available from Sensi Seed Bank, they call it "ShivaSkunk".
–MrSoul"We have been working from a m39 mother plant that is from 1987. This is absolutely the most powerful strain
I have ever come across. I have purchased & grown many of the newer bragged on strains and still am looking
for something that will even come close to this strain. I'm not saying that this variety is the most potent, just
that in my over 15 yr. search this is what I've found to be the strongest so far."-Clone
"M39 by SSSC was "Basic5"/Sk1, but I BELIEVE "Basic5" was actually NL5, but SSSC weren't allowed to say
so. You're actually looking for NL5/Sk1 which is available from Sensi Seed Bank, they call it "ShivaSkunk".
–MrSoul
I don't know where they get that crap about it finishing Sept. 1st. I was at 44 something degrees north, and
they didn't finish until about the end of September. I do remember that there was a lot of variation between
seeds, maybe I just got some slow ones. Or maybe they were just lying
COLLEGE home COLLEGE too.” –been there

I grew this last year outdoors.
cheap cannabis seeds about 5' tall marihemp at harvest, lots of short
Nirvana side branches with plenty of buds. yield
was about 4 oz.
Hanfshop Cannabis Seeds Buy of average quality weed. excellent hashy taste which peaked at about 1 month of curing and
then started to
Pukka decline. high was average and didn't last very long. maybe due to accidental pollination.
susceptible to bud mold in high humidity.
” dr.
atomic Clone flowered under a 400watt, 42watts/sq.ft. Grown organically in a soilless medium, 1:1:1 ratio of GOOD
potting mix, perlite, & worm castings. Finished about 16"-18" tall. Nice high flower to leaf ratio, manicuring would
be a breeze if it didn't have so much resin globbed all over it. Nugs were dense for a 400watt, but not tight like
they are under the big lights. I flowered for 53 days, last 24 hours no light. I alternated Big Bloom & Hi-P fishes
(Neptune’s Harvest) for food. Total yield about 15gm of very frosty & very potent well manicured buds. Good
flavor, but a STRONG smoke. Very "up" high. I can get a lot done instead of just vegging. By far the best I've
grown. No shit.” – Bill Clinton
This hybrid is the pinnacle of achievement in Cannabis breeding today. The result: an extremely potent plant
with a great Sativa high. In the seed swap club 1994 harvest festival HOW SEEDS CANNABIS CANNABIS TO this
big bud
variety was miles ahead of its competitors. The high
yields compensate for the slightly longer flowering period. Hybrid vigour provides for lush growth, heavy bud
formation and abundant resin. A true champion!
Seedsdirect
s are well mixed in the spore
syringe. Often, it takes several tries to get the spores fully broken apart
and well mixed.
If the spores in the print have been dried and are not fresh, it is best to
wait six hours to use the spore syringe. The spores need to rehydrate. If
your in a hurry, the spores can still rehydrate in the culture jars.
How to Make a Spore Print
Once you have a mature mushroom, you are in a position to make a
spore print and use it to continue cultivation of mushrooms.
The cap
should be harvested when the mushroom cap has become flat or is
starting to invert.
Sterility is key. Adaptation-25 Be careful not to do anything that will
compromise the sterility of your spore print. The typical procedure is
to cut the stalk off of a mature mushroom very close to the cap. A
sterilized knife or razor blade is used to do this. The cap is then laid on
a sterile piece of tissue paper or card stock and a small glass set over it.
The glass is needed for
Cannabis Dans Le Sang two reasons.
First, it keeps the spore print
insulated from airborne contaminates. Secondly, it helps keep the
humidity high so the mushroom cap can continue to live and drop its
spores.
One note of caution. Some humidity usually needs to be
(10 of 15) 5/1/2002 6:54:20 PM]
How To Grow Magic Mushrooms The Magic Mushroom Growers Guide (page 3)
allowed to escape.
You want the environment inside the glass to be
slightly less humid than the environment in which the mushroom was
grown. If you have problems getting a cap to drop its spores, try using
a piece of paper for the print that fits entirely inside the glass and
spreading out a wash cloth flat on the table. Let the edge of the glass
seal to the wash cloth instead of the paper. This will usually allow
enough humidity to escape to cause the cap to drop spores.
If everything
positronics
goes well, after a day or two the cap will drop its spores.
Adaptation-26 There will be a purple-brown dust underneath the cap.
These are the spores.
Eye glass lens paper is good source of sterile tissue paper. A box of
waxy tissue paper that deli's use to pick up donuts and rolls is another
excellent source of sterile tissue paper.
Card stock (such as a recipe
card) is a bit easier to use later when you want to prepare a spore
syringe, but you have to expend the extra effort up front to sterilize it.
To use card stock, place in a 425 degree F. oven for 15 minutes. Let it
cool with a glass over it before you place the cap on it.
Once you have a spore print on the paper, remove the glass and cap.
Fold the spore print in half and seal the edges so air can not get in. A
piece of scotch tape on each side will do nicely. The spores will stay
viable for 18 months if they are kept in a cool, dry and dark spot. If
you place a small amount of desiccant in the bottom of a film container
and place a cotton ball on top of the desiccant, you have an ideal
container to keep the spore print. The cotton ball will keep the
desiccant from touchis are well mixed in the spore
syringe. Often, it takes several tries to get the spores fully broken apart
and well mixed.
If the spores in the print have been dried and are not fresh, it is best to
wait six hours to use the spore syringe. The spores need to rehydrate. If
your in a hurry, the spores can still rehydrate in the culture jars.
How to Make a Spore Print
Once you have a mature mushroom, you are in a position to make a
spore print and use it to continue cultivation of mushrooms.
The cap
should be harvested when the mushroom cap has become flat or is
starting to invert.
Sterility is key. Adaptation-25 Be careful not to do anything that will
compromise the sterility of your spore print. The typical procedure is
to cut the stalk off of a mature mushroom very close to the cap. A
sterilized knife or razor blade is used to do this. The cap is then laid on
a sterile piece of tissue paper or card stock and a small glass set over it.
The glass is needed for two reasons.
First, it keeps the spore print
insulated from airborne contaminates. Secondly, it helps keep the
humidity high so the mushroom cap can continue to live and drop its
spores. One note of caution. Some humidity usually needs to be
(10 of 15) 5/1/2002 6:54:20 PM]
How To Grow Magic Mushrooms The Magic Mushroom Growers Guide (page 3)
allowed to escape. You want the environment inside the glass to be
slightly less humid than the environment in which the mushroom was
grown. If you have problems getting a cap to drop its spores, try using
a piece of paper for the print that fits entirely inside the glass and
spreading out a wash cloth flat on the table. Let the edge of the glass
seal to the wash cloth instead of the paper. This will usually allow
enough humidity to escape to cause the cap to drop spores.
If everything goes well, after a day or two the cap will drop its spores.
Adaptation-26 There will be a purple-brown dust underneath the cap.
These are the spores.
Eye glass lens paper is good source of sterile tissue paper. A box of
waxy tissue paper that deli's use to pick up donuts and rolls is another
excellent source of sterile tissue paper. Card stock (such as a recipe
card) is a bit easier to use later when you want to prepare a spore
syringe, but you have to expend the extra effort up front to sterilize it.
To use card stock, place in a 425 degree F. oven for 15 minutes. Let it
cool with a glass over it before you place the cap on it.
Once you have a spore print on the paper, remove the glass and cap.
Fold the spore print in half and seal the edges so air can not get in. A
piece of scotch tape on each side will do nicely. The spores will stay
viable for 18 months if they are kept in a cool, dry and dark spot. If
you place a small amount of desiccant in the bottom of a film container
and place a cotton ball on top of the desiccant, you have an ideal
container to keep the spore print. The cotton ball will keep the
desiccant from touchis are well mixed in the spore
syringe. Often, it takes several tries to get the spores fully broken apart
and well mixed.
If the spores in the print have been dried and are not fresh, it is best to
wait six hours to use the spore syringe. The spores need to rehydrate. If
your in a hurry, the spores can still rehydrate in the culture jars.
How to Make a Spore Print
Once you have a mature mushroom, you are in a position to make a
spore print and use it to continue cultivation of mushrooms. The cap
should be harvested when the mushroom cap has become flat or is
starting to invert.
Sterility is key. Adaptation-25 Be careful not to do anything that will
compromise the sterility of your spore print.
The typical procedure is
to cut the stalk off of a mature mushroom very close to the cap. A
sterilized knife or razor blade is used to do this. The cap is then laid on
a sterile piece of tissue paper or card stock and a small glass set over it.
The glass is needed for two reasons. First, it keeps the spore print
insulated from airborne contaminates. Secondly, it helps keep the
humidity high so the mushroom cap can continue to live and drop its
spores. One note of caution. Some humidity usually needs to be
(10 of 15) 5/1/2002 6:54:20 PM
How To Grow Magic Mushrooms The Magic Mushroom Growers Guide (page 3)
allowed to escape. You want the environment inside the glass to be
slightly less humid than the environment in which the mushroom was
grown.
If you have problems getting a cap to drop its spores, try using
a piece of paper for the print that fits entirely inside the glass and
spreading out a wash cloth flat on the table.
Let the edge of the glass
seal to the wash cloth instead of the paper. This will usually allow
enough humidity to escape to cause the cap to drop spores.
If everything goes well, after a day or two the cap will drop its spores.
Adaptation-26 There will be a purple-brown dust underneath the cap.
These are the spores.
Eye glass lens paper is good source of sterile tissue paper. A box of
waxy tissue paper that deli's use to pick up donuts and rolls is another
excellent source of sterile tissue paper. Card stock (such as a recipe
card) is a bit easier to use later when you want to prepare a spore
syringe, but you have to expend the extra effort up front to sterilize it.
To use card stock, place in a 425 degree F. oven for 15 minutes. Let it
cool with a glass over it before you place the cap on it.
Once you have a spore print on the paper, remove the glass and cap.
Fold the spore print in half and seal the edges so air can not get in. A
piece of scotch tape on each side will do nicely.
The spores will stay
viable for 18 months if they are kept in a cool, dry and dark spot. If
you place a small amount of desiccant in the bottom of a film container
and place a cotton ball on top of the desiccant, you have an ideal
container to keep the spore print. The cotton ball will keep the
desiccant from touchis are well mixed in the spore
syringe. Often, it takes several tries to get the spores fully broken apart
and well mixed.
If the spores in the print have been dried and are not fresh, it is best to
wait six hours to use the spore syringe. The spores need to rehydrate. If
your in a hurry, the spores can still rehydrate in the culture jars.
How to Make a Spore Print
Once you have a mature mushroom, you are in a position to make a
spore print and use it to continue cultivation of mushrooms.
The cap
should be harvested when the mushroom cap has become flat or is
starting to invert.
Sterility is key. Adaptation-25 Be careful not to do anything that will
compromise the sterility of your spore print. The typical procedure is
to cut the stalk off of a mature mushroom very close to the cap. A
sterilized knife or razor blade is used to do this. The cap is then laid on
a sterile piece of tissue paper or card stock and a small glass set over it.
The glass is needed for two reasons. First, it keeps the spore print
insulated from airborne contaminates. Secondly, it helps keep the
humidity high so the mushroom cap can continue to live and drop its
spores. One note of caution. Some humidity usually needs to be
(10 of 15) 5/1/2002 6:54:20 PM
How To Grow Magic Mushrooms The Magic Mushroom Growers Guide (page 3)
allowed to escape. You want the environment inside the glass to be
slightly less humid than the environment in which the mushroom was
grown. If you have problems getting a cap to drop its spores, try using
a piece of paper for the print that fits entirely inside the glass and
spreading out a wash cloth flat on the table.
Let the edge of the glass
seal to the wash cloth instead of the paper. This will usually allow
enough humidity to escape to cause the cap to drop spores.
If everything goes well, after a day or two the cap will drop its spores.
Adaptation-26 There will be a purple-brown dust underneath the cap.
These are the spores.
Eye glass lens paper is good source of sterile tissue paper. A box of
waxy tissue paper that deli's use to pick up donuts and rolls is another
excellent source of sterile tissue paper.
Card stock (such as a recipe
card) is a bit easier to use later when you want to prepare a spore
syringe, but you have to expend the extra effort up front to sterilize it.
To use card stock, place in a 425 degree F. oven for 15 minutes. Let it
cool with a glass over it before you place the cap on
Aeroponic Nl it.
Once you have a spore print on the paper, remove the glass and cap.
Fold the spore print in half and seal the edges so air can not get in. A
piece of scotch tape on each side will do nicely. The spores will stay
viable for 18 months if they are kept in a cool, dry and dark spot. If
you place a small amount of desiccant in the bottom of a film container
and place a cotton ball on top of the desiccant, you have an ideal
container to keep the spore print. The cotton ball will keep the
desiccant from touchi
I grew EP last year for the first time. I didn’t get them to maturity, because of three or four major fukups by
me, along with a VERY wet autumn, so my yield was almost nil. I planted out on June-1, they suffered a couple
of frosts during which some purple showed. I planted them out after sexing on 12/12, which I wouldn't do now,
because once these plants start to flower, they don’t like re-vegging, so a confused bunch of semi-flowering
plants was the result. Water soluble slug pellets resulted in the plants being eaten to one foot tall bare stems
soon after. I reverted to my other type of (non-soluble) slug-pellet and the damage stopped. One plant
re-grew in veg form, the others continued in semi-flower. Something odd happened then- which you should
take note of- I had 18" to 2' chicken wire fences around each plant, but somehow some bastard rabbits ate the
newly growing plants (this was early July)- rabbits that could CLIMB FENCES!. While the 5-HT precursors tryptophan and 1-5-HTP cause an increase in serum prolactin concentration, a combination of 1-5-HTP with a peripheral decarboxylase inhibitor was found to reduce the serum prolactin concentration. This combination seemed to behave like a DA agonist. This effect is not produced by the decarboxylase inhibitor per se. A possible explanation is that 5-HTP is converted to 5-HT in CA-ergic neurons, that 5-HT supersedes the CA from the stores, and that some of the CA reach the synaptic cleft and stimulate CA receptors. Another possible explanation is that 5-HTP decarboxylase is centrally inhibited as well, and that an effect of 5-HTP itself is involved here. In view of the observations made it is doubtful whether the therapeutic effect of 5-HTP combined with a peripheral decarboxylase inhibitor in depressions and myoclonus can in fact be atributed to activation of central serotonergic systems. the buds looked like I imagine WW looks,
white ;-) Note: This plant piles on the resin in the last few days, I don’t recommend harvesting early and
know I won’t do it again."
"Aroma
It was nice to get something that smelled good in the grow to compensate for the smell, which I don’t like, of
the N x S when it is growing. It smells of citrus, fruity, with the skunk lurking in the background is the best
way I can describe it. It isn’t over powering but did require more than a baggy to contain the smell when I
brought an ounce to someone."
"Buzz
When I cut the bud at 37 days with the 50% withered flowers I test smoked it with a buddy on a ride. He
doesn’t smoke as much as I do but he isn’t a lightweight by any means, he smokes almost once a day I
guess. He missed 6 turns on a familiar ride in 1 hour and 15 minutes. He liked the buzz but was not happy
with it for driving since he was spacing out so much. I thought the whole thing was kind of funny myself and
I’m sure you know I was all over him on every missed turn. (Little did he know..I wasn’t exactly catching them
all either ;-) I didn’t like the buzz from this early bud at first, it was too speedy for me, but it did calm down
after a while. The other thing that wasn’t too impressive from it was the staying power of the buzz.
Now the buds harvested later were a completely different story. Mature buds have a unique buzz. It’s
definitely not couch lock weed but you can find comfort in your big buddy if you want to. It starts like a sativa
soar, then quickly settles into a body and mind buzz conducive to thought and guess what…you can then
verbalize those thoughts without difficulty ;-) This is a social indica."
"The buzz lasts quite a while and slowly turns into a couch lock thing if you don’t puff some more. Bottom
line-. As a head grower I would keep the plant just for the buzz I like the buzz since couch lock isn’t all there
is to life, I guess ;-) If I were still growing for dough I would love this plant and will keep it in case I get back
into the game someday.
Yo money tree folks… people like the looks and smell of this weed. I don't have any other comments on the
buzz yet but will include them in the additional T44 info that will be given in the next Flo Sheet.” – flick"
"“This variety is a Cheyenne Indica with a skunky influence, for lovers of fragrant weed with a strong buzz.
Take this girl just before bed and have a seductively sedative session. Her name was derived from her
stupefying qualities. Gag me with a bud."
"“A pure variety, never hybridized, imported from Afghanistan, grown in Holland. Very broad leaves, 100%
Indica. Heavy buds with lots of resin. Some plants turn purple at harvest time. Rather high flower to leaf ratio.
Aroma and flavor are heavy, almost medicinal. Very strong, physical, practically narcotic high. Average yields."
"“The Afghani part is a very short Christmas tree-like plant, 100% Indica, very resinous and very consistent. The
F "IMHO a Northern Lights would be best, easiest, and have the best high. This variety has been around for
years; it has great name recognition. It
Seedsofpassion is disease free, and easy to grow. The yield is above average though
not perhaps quite as great as some of the Big Bud hybrids. It can be grown using any method including SOG,
SCROG. or bushy. An
Seedsofpassion all around great strain.
" -Kohala They're funny plants when it comes to cuttings. They seem to be much slower to take than most, but the huge
amount of vigor that is inherent in the breed means that the cuts don’t die- they just hang around and don't
do much. I took cuttings of my over-wintering mother which took about 3 weeks to take- during this time, the
cuts didn’t look ill, and didn’t grow, they just 'existed'. The mother plant doesn’t do well indoors- mine seemed
to get freaked out and started to flower. It flowered though most of winter, then suddenly decided to revert, I
don’t know why.