durban poison
plantar cannabis
“I grew Sensi Seeds NL#5 and it was one of the best plants I had ever seen. VERY distinctive aroma and taste,
I agree with Skunkman, its like a psychedelic couchlock, the buzz goes for loooong. Plus its one of the best
indoor plants I ever saw, very short and compact, mega-phat top-cola, pretty fast (8 weeks), wont grow much
longer after inducing bloom, excellent flower/leaf ratio. I had good 400 gr./s.m. which I consider nice. Only
drawback I noticed was you better watch the air humidity, they have a tendency to catch bud rot, and the colas
are just too fat and sticky so the air won’t go into. But when you keep moisture down to max. 50% rh. you
should do well. To my experience they are true-breeding, but on the other hand I heard that too much
inbreeding out of a small number of species might cause some problems and show up some indica aspects
you may not want to have. I heard of NL#5 F2 that smelled and tasted like shit and had a very dull buzz.” -
huzzit
"(For multiple sclerosis) my friend is currently using a pure indica (NL#5) with good results..." - pot newz While I'm not going to say that Big Bud isn't a good strain, it's not as magical as many people seem to think.
The main problem is the name, Big Bud, everyone expects massive buds. They are big, but not significantly
larger than many other top strains. The potency is good but not knock you off your feet good. There is huge
variations from plant to plant, some are killer and deserving of some of the legends, but the majority are just
typical(of high quality strains). Overall, a good plant as long as you don't expect miracles. I just finished a
bowl of it myself. Northern Lights
“pure Indica 88/89/90
An absolute must for the indoor grower! For the last couple of years the Northern Lights® has dominated the
various Harvest Festivals. Through selective breeding we have succeeded in producing one of the most powerful
plants in the world. On top of that, we have developed a strain highly adapted for indoor growing: compact,
powerful with a good yield and exceptional resin production. The most lucrative plant for the indoor grower.
Flowering: 45-50 days.
Height: 100-125 cm.
Yield: up to 125 gr.” – Sensi Seed Bank catalog o not lead to it, but actually act as deterrents. One of the most important actions of
cannabis is to quiet and stupefy the individual so that there is no tendency to
violence..."33] A Canadian physician, H. B. M. Murphy, is quoted by Chopra as a
summary on marijuana and crime, saying, "Most serious observers agree that cannabis
does not, per se, induce aggressive or criminal activities, and that the reduction of the
work drive leads to a negative correlation with criminality rather than a positive one."34]
The Chopras seem to provide thin fodder for the argument of the criminal inducement of
cannabis.
The same cannot be said for the work of Gardikas ("Hashish and Crime").35] A police
officer and head of the Greek Criminal Service in Athens, Gardikas reviewed 379 cases of
individuals who were arrested for publicly using cannabis between 1919 and 1950. In the
sample, 117 cases were first arrested for cannabis offenses and, after their release, became
"confirmed criminals," having been arrested for a total of 420 offenses in the period
studied. The fact that they became criminal only after their involvement with hashish
demonstrates to Gardikas as well as to law enforcement officers and to various other
commentators that hashish causes crime. Over 200 cases in the sample were already
criminal prior to starting the use of hashish, and the remaining fifty-three, after their arrest
for cannabis, did not commit any nonhashish crimes later.
We are not told how these cases were selected. Are they the only cannabis offense cases
(20 of 28)4/15/2004 1:08:08 AM
The Marijuana Smokers - Chapter 9
that came to Gardikas' attention? Were they gathered more or less by accident? Were they
a result of random selection? Or were they selected for the very fact that their crime rate
was so high? We have no way of knowing. And what social universe does this group
represent: All hashish smokers in Greece? Not having this information, the methodology
seems dubious.
It is a certainty that arrested cannabis smokers are different from nonarrested ones, just
as arrested violators of any law are radically different from those who also commit the
same crimes, but who do not get arrested. The class factor operates here powerfully, just
to mention a single source of variation. The middle-class violator is far more able to avoid
detection through a combination of bias and caution, as well as a number of other factors,
such as police saturation in poorer areas. Working-class patterns of crime, particularly
certain kinds of crime, such as violent ones, are very different from those of the middleclass
user. To use arrested hashish smokers as an indication of the criminal potential
inherent in the drug is fallacious.
Also, it might very well be necessary to raise the question of the criminogenic effect of
the Greek penal system. Anyone arrested once becomes subject to greater scrutiny, and
therefore, almost of necessity, his crime rate will be s are well mixed in the spore
syringe. Often, it takes several tries to get the spores fully broken apart
and well mixed.
If the spores in the print have been dried and are not fresh, it is best to
wait six hours to use the spore syringe. The spores need to rehydrate. If
your in a hurry, the spores can still rehydrate in the culture jars.
How to Make a Spore Print
Once you have a mature mushroom, you are in a position to make a
spore print and use it to continue cultivation of mushrooms. The cap
should be harvested when the mushroom cap has become flat or is
starting to invert.
Sterility is key. Adaptation-25 Be careful not to do anything that will
compromise the sterility of your spore print. The typical procedure is
to cut the stalk off of a mature mushroom very close to the cap. A
sterilized knife or razor blade is used to do this. The cap is then laid on
a sterile piece of tissue paper or card stock and a small glass set over it.
The glass is needed for two reasons. First, it keeps the spore print
insulated from airborne contaminates. Secondly, it helps keep the
humidity high so the mushroom cap can continue to live and drop its
spores. One note of caution. Some humidity usually needs to be
(10 of 15) 5/1/2002 6:54:20 PM]
How To Grow Magic Mushrooms The Magic Mushroom Growers Guide (page 3)
allowed to escape. You want the environment inside the glass to be
slightly less humid than the environment in which the mushroom was
grown. If you have problems getting a cap to drop its spores, try using
a piece of paper for the print that fits entirely inside the glass and
spreading out a wash cloth flat on the table. Let the edge of the glass
seal to the wash cloth instead of the paper. This will usually allow
enough humidity to escape to cause the cap to drop spores.
If everything goes well, after a day or two the cap will drop its spores.
Adaptation-26 There will be a purple-brown dust underneath the cap.
These are the spores.
Eye glass lens paper is good source of sterile tissue paper. A box of
waxy tissue paper that deli's use to pick up donuts and rolls is another
excellent source of sterile tissue paper. Card stock (such as a recipe
card) is a bit easier to use later when you want to prepare a spore
syringe, but you have to expend the extra effort up front to sterilize it.
To use card stock, place in a 425 degree F. oven for 15 minutes. Let it
cool with a glass over it before you place the cap on it.
Once you have a spore print on the paper, remove the glass and cap.
Fold the spore print in half and seal the edges so air can not get in. A
piece of scotch tape on each side will do nicely. The spores will stay
viable for 18 months if they are kept in a cool, dry and dark spot. If
you place a small amount of desiccant in the bottom of a film container
and place a cotton ball on top of the desiccant, you have an ideal
container to keep the spore print. The cotton ball will keep the
desiccant from touchi The plants build up alkaloids during dry seasons
and draw upon them for growth when the rains come. If the plants are harvested
during or after a wet spell, the alkaloid content may have dropped below 50
percent. If you have a soil test kit, you can get a good indication of the potency of
cacti growing wild. If the soil is rich in nitrogen, the plants are likely to be rich in
alkaloids.
When harvesting peyote, many people uproot the entire plant. This is
unnecessary and wasteful. The roots contain no mescaline. Some of these plants
have taken a long time to reach their size. A cactus three inches in diameter may
be more than 20 years old. To collect peyote properly the button should be
cleanly decapitated slightly above ground level. When the roots are left intact
new buds will form where the old was removed. These will eventually develop
into full-size buttons which may be harvested as before. Faulty harvesting
method have seriously depleted populations of this cactus. Because of the
presence of several phenolic alkaloids peyote cacti do not spoil easily and may
be kept in their fresh form for several weeks after harvesting. If they are to be
kept longer than this they must be refrigerated, frozen, or dried. The enzymes
which cause the harvested plant to eventually decompose also destroy the
mescaline and other alkaloids. To dry peyote buttons lay them out in the hot sun
or in an oven at 250 degrees F until completely devoid of moisture.
OTHER PEYOTE-TYPE CACTI OF CENTRAL MEXICO
There are several cacti which are used by the Tarahumares and other tribes of
central Mexico as substitutes for peyote. Many of these cacti are now under
investigation for their alkaloidal content and sychopharmacological activity.
Progress is somewhat retarded in the studies of the effects of these plants
because almost all experimentation has been conducted on laboratory animals
rather than humans. Some of these cacti have been found to contain mescaline
and other related alkaloids with known sympathomimetic properties. Much further
research is needed on these plants and their activity. However, we will attempt to
bring the reader up to date on what is known about them at this time.
PEYOTILLO:
This small cactus is botanically called PELECYPHORA ASELLIFORMIS. It is
also known sometimes as the hatchet cactus because of its oddly flattened
tubercules. It is often found growing in the state of San Louis Potosi in central
Mexico. The plant contains traces of mescaline too minute to have any effect. It
also contains small amounts of anhalidine, anhaladine, hordenine, Nmethylmescaline,
pellotine, 3-demethyltrichocereine, B-phenethylamine, Nmethyl-
B-phenethylamine, 3,4-dimethoxy-B-pheneththyl-amine, N-methyl-3,4-
dimethoxy-B-phenethylamine, and 4-methoxy-B-phenethy- lamine. Most of these
are found in peyote but in much larger quantities.
TSUWIRI:
The botanical name of this cactus is ARIOCARPUS RETUSUS. The Huichol
name tsuwiri means F
Friend
flying dutchmen has been growing supposed BB for a while now, and let me say that the BB from Sensi I grew and
selected a perfect Cannabis Ska P mother (maybe just great luck?), but mine sure is different. Much greener, tastier, more
potent, amazing. 8-10 Durban Poison in my opinion. But even Sensi says that 25% are "Special". So I'd advise germing the
whole batch (pack ) of seed as to give yourself a better shot
mss at a primo Mom! Good luck dude. If you never
grew any exotics before, try an easier
mss strain. You really kind of need to know what your doing (selection wise).”
– Bdubs
The only side effect reported by the subjects taking 5-HTP was stomachache, of which there were 41 instances during
Magic Garden the entire three-year trial. In the placebo group, there were only 10 instances of stomachache, but also 118 instances of nausea and 78 of abdominal pain. This is not inconsistent with the very few side effects other studies have reported by
white widow
those taking 5-HTP. These results may be explained by 5-HTP's ability to reduce hypersensitivity
white widow
to pain. Moreover, in the study, eosinophilia (elevation of the special white blood cells associated with inflammation) was not reported in the 5-HTP group; in the control group, there was one case.
"Regarding Early Girl, Ed Rosenthal says he
Shivas knows (it was) developed by Cultivators' Choice in California in the
70's.”
“Early Girl - This is a mostly Indica early variety developed in Northern California. The plants are compact and
very sturdy, and will tend to grow to one main stem. Very potent, medium yield, with a hashy taste and aroma.
Inbred for 4 generations and carefully selected for quality and earliness.
Early Girl is an outstanding choice for
growers seeking an early Indica-type.
“Bank: Positronics
Supplier: Jock
Started with 10 seeds all germinated. One sprout was lagging far behind the others and it was put out of its
misery. Ended up with 1 female, 5 males, and 3 herms.
Again, like the rest of the Positronic stock grown out so far, these plants were close to identical in appearance.
They looked very much like the NL x Shiva that also came from Posi. To bad it didn’t take after the NL x Shiva
in all respects.
The one female was not very impressive grown from seed and turned herm. The buzz was acceptable but My San Pedro Cactus Won T Gain Girth it
grew like chit. Very airy bud with little resin and a lot of leaf. The buzz made it worth keeping for a harvest from
clone one time to see if it could redeem itself.
Because the buzz got better it was given one more chance even
though it still showed male flowers, not a lot but too many. The second time grown from clone it showed male
flowers again and didn’t improve much in quality or growth. So now it’s dead.
To be fair it could be that this plant just couldn’t handle being flowered so early and freaked, doubtful but
possible." - flick
Green Spirit is a short resiny 8 week strain that crystals up nicely and has a real bomb taste. The only
drawback I see is the mold susceptibility trait inherited from its Skunk#1 forefathers.-Mcgee
This indoor hybrid has a high calyx/leaf ratio & finishes flowering in 7 weeks or
Whitewidow less. Our big-yielding,
lemon-scented female clone named "Genius" because of her CLEAR, energetic, thought-provoking high was
crossed with a robust Cinderella 99 male to create Apollo Eleven. Expect some variation among individuals. The
best females are short, heavily branched plants with multitudes of dense, resinous bud sites - perfect for
SCROG. The smoke has a sweet citrus flavour. The high is UP & HAPPY." - Bros. Grimm
Northern Lights catalog
I would have to say to give Blueberry a shot. I received mine from BC Seeds, WOW. I used to grow with stash
seeds. No more. Blueberry in 65 days budding time produced 1.8 Oz per s.f., with 55 watts per s.f., vented
highly. The strength and the taste were a 10 on 1-10 with skunk #1 being a 5.
“Winner of the Cannabis Cup in 1989. Mostly Indica. All plants have guaranteed high yields, 25% has
something special to it. Usually the lower branches collapse under the weight of the buds. Cash cropper’s
delight.
The plants build up alkaloids during dry seasons
and draw upon them for growth when the rains come. If the plants are harvested
during or after a wet spell, the alkaloid content may have dropped below 50
percent. If you have a soil test kit, you can get a good indication of the potency of
cacti growing wild. If the soil is rich in nitrogen, the plants are likely to be rich in
alkaloids.
When harvesting peyote, many people uproot the entire plant. This is
unnecessary and wasteful. The roots contain no mescaline. Some of these plants
have taken a long time to reach their size. A cactus three inches in diameter may
be more than 20 years old. To collect peyote properly the button should be
cleanly decapitated slightly above ground level. When the roots are left intact
new buds will form where the old was removed. These will eventually develop
into full-size buttons which may be harvested as before. Faulty harvesting
method have seriously depleted populations of this cactus. Because of the
presence of several phenolic alkaloids peyote cacti do not spoil easily and may
be kept in their fresh form for several weeks after harvesting. If they are to be
kept longer than this they must be refrigerated, frozen, or dried. The enzymes
which cause the harvested plant to eventually decompose also destroy the
mescaline and other alkaloids. To dry peyote buttons lay them out in the hot sun
or in an oven at 250 degrees F until completely devoid of moisture.
OTHER PEYOTE-TYPE CACTI OF CENTRAL MEXICO
There are several cacti which are used by the Tarahumares and other tribes of
central Mexico as substitutes for peyote. Many of these cacti are now under
investigation for their alkaloidal content and sychopharmacological activity.
Progress is somewhat retarded in the studies of the effects of these plants
because almost all experimentation has been conducted on laboratory animals
rather than humans. Some of these cacti have been found to contain mescaline
and other related alkaloids with known sympathomimetic properties. Much further
research is needed on these plants and their activity. However, we will attempt to
bring the reader up to date on what is known about them at this time.
PEYOTILLO:
This small cactus is botanically called PELECYPHORA ASELLIFORMIS. It is
also known sometimes as the hatchet cactus because of its oddly flattened
tubercules. It is often found growing in the state of San Louis Potosi in central
Mexico. The plant contains traces of mescaline too minute to have any effect. It
also contains small amounts of anhalidine, anhaladine, hordenine, Nmethylmescaline,
pellotine, 3-demethyltrichocereine, B-phenethylamine, Nmethyl-
B-phenethylamine, 3,4-dimethoxy-B-pheneththyl-amine, N-methyl-3,4-
dimethoxy-B-phenethylamine, and 4-methoxy-B-phenethy- lamine. Most of these
are found in peyote but in much larger quantities.
TSUWIRI:
The botanical name of this cactus is ARIOCARPUS RETUSUS. The Huichol
name tsuwiri means F “Cinderella 99 will be available from Brothers Grimm in January (’99). This is the "cubed" generation resulting
from backcrossing Princess 3 times with her successive male offspring. Expect a true-breeding strain with the
same short flowering period, tropical fruit flavour, and soaring cerebral high. “ - MrSoul I don't know where they get that crap about it finishing Sept. 1st. I was at 44 something degrees north, and
they didn't finish until about the end of September. I do remember that there was a lot of variation between
seeds, maybe I just got some slow ones. Or maybe they were just lying too.” –been there
“Winner of the Cannabis Cup in 1989. Mostly Indica. All plants have guaranteed high yields, 25% has
something special to it. Usually the lower branches collapse under the weight of the buds. Cash cropper’s
delight. I grew this last year outdoors. about 5' tall at harvest, lots of short side branches with plenty of buds. yield
was about 4 oz. of average quality weed. excellent hashy taste which peaked at about 1 month of curing and
then started to decline. high was average and didn't last very long. maybe due to accidental pollination.
susceptible to bud mold in high humidity.” dr.atomic
While I'm not going to say that Big Bud isn't a good strain, it's not as magical as many people seem to think.
The main problem is the name, Big Bud, everyone expects massive buds. They are big, but not significantly
larger than many other top strains. The potency is good but not knock you off your feet good. There is huge
variations from plant to plant, some are killer and deserving of some of the legends, but the majority are just
typical(of high quality strains). Overall, a good Fonddecrancannabis plant as long as you don't expect miracles.
I just finished a
bowl of it myself.
"I got NL#5 never had any problems with cloning, also if its real NL#5 (which is Pure NL) it has almost no smell
at all which is great if ya grow indoors. The ones I've seen really fill out at the end of the flowering cycle, it
sometimes looks like the yield will be marginal and then in the last couple of weeks--bam! I have found this
with most indica strains, usually they do not fill out till the last 2-3 weeks of flowering. NL is a great indoor
strain, one of my fav's too." -Unknown
hempseeds -- 9/4/2010 11:31:20 AM
seeds order seeds order
e, the things I was doing might be silly, but they felt
very natural.
Hunger and taste was another question which I singled out specifically; 150
respondents, or about 75 percent of the sample, said that they had eaten food while they
were high. Of this 150, six said that there was no difference between eating high and
eating straight, that marijuana had no effect on the nature of the eating experience. Eight
percent said that the experience was worse in some way; they had less of an appetite, or
the food tasted worse, and that they did not enjoy the experience of eating food when they
were high. Thirty-eight percent said that the most dominant characteristic about being
high and eating was that one's appetite was stimulated; one had a tremendous appetite
while high. Thirty-one percent said that the food tasted more delicious high than
ordinarily, that eating was a more enjoyable experience. Eleven percent said, merely, that
they were more acutely aware of taste, that they could discern the various tastes more
accurately while high. The remaining respondents said that they were G 13 more aware, above
all, of the texture of the food while high, that the most important thing was that they
suddenly desired unusual combinations of foods, that they wanted to eat weird foods they
had Skunk never considered before, and that they had a special craving for sweet things.
We should also expect sexual activity to be closely intertwined with, and powerfully
influenced by, smoking marijuana, and in this, our expectations are well supported. Threequarters
of our interviewees said that they had experienced sex while high on marijuana.
We asked several specific questions on the difference between sex high on marijuana and
sex normally.
First I asked, "Do you think being high on marijuana stimulates your sex interest, or
not?" More than a third of the respondents said that marijuana had no effect on their
sexual desire. Five percent said that marijuana had a negative effect, that it turned them
off sexually. Thirteen percent said that the effect depends on their mood or on their sexual
partner. In this group, a common response among the women was that marijuana acts as a
sexual stimulant when they're with someone with whom they're already intimate, but
(19 of 34)4/15/2004 1:07:27 AM
The Marijuana Smokers - Chapter 7
when they smoke with a stranger, the prospect of sex becomes even more distasteful than
ordinarily. For these women, marijuana seems to polarize sexual desire.
But 44 percent, a
strong plurality, replied that marijuana definitely increased their sexual desire.
Next, I asked, "Is your enjoyment of sex any different high?" The respondents were less
divided on this question.
An overwhelming majority, 68 percent, replied that marijuana
increased their sexual enjoyment, that their orgasmic pleasure was heightened by the drug.
Yet most scientists claim that in physiological terms marijuana lacks an aphrodisiac effect.
If anything, The only side effect reported by the subjects taking 5-HTP was stomachache, of which there were 41 instances during the entire three-year trial. In the placebo group, there were only 10 instances of stomachache, but also 118 instances of nausea and 78 of abdominal pain. This is not inconsistent with the very few side effects other studies have reported by those taking 5-HTP. These results may be explained by 5-HTP's ability to reduce hypersensitivity to pain. Moreover, in the study, eosinophilia (elevation of the special white blood cells associated with inflammation) was not reported in the 5-HTP group; in the control group, there was one case. Friend has been growing supposed BB for a while now, and let me say that the BB from Sensi I grew and
selected a perfect mother (maybe just great luck?), but mine sure is different. Much greener, tastier, more
potent, amazing. 8-10 in my opinion. But even Sensi says that 25% are "Special". So I'd advise germing the
whole batch (pack ) of seed as to give yourself a better shot at a primo Mom! Good luck dude. If you never
grew any exotics before, try an easier strain. You really kind of need to know what your doing (selection wise).”
– Bdubs I created a 'goblet' effect outwards around the top of the wire-tube, and this stopped the damage. Having been eaten back to about 18" in early
July, the plants reached about 6' by week-1 Oct. During the whole summer, there was no single week that they
were not rained on VERY heavily, and for the last month of their lives they were in perpetual cloud/100%
moisture. Only one plant showed any signs of mold (and this one showed only small patches)- which I was
extremely pleased with.
Afghani
Afghani
Afghani
Afghani
Modification
G 13 of
Afghani Petrzilka's
Kali Mist process (BF3oEt20/MgS04) by
Razdan et al
"AFOAF grew some (Apollo) recently and got an indica phenotype that finished around 50 days, and a Durban
phenotype that took 60 days.
The indica phenotype is very resinous, clear high. Not racy nor paranoid.
Dense buds, low odor.
The Durban phenotype has a stronger high than pure Durban, very clear, very racy, even paranoid. Buds very
fluffy, and they flop over from their own weight. Definitely a creeper phenotype in the gene pool (Durban).
The mom of
the flying dutchman A-11 is Genius, an F2
the flying dutchman
of Jack
G 13 Herer crossed to an unknown male (likely a Durban imho).
The dad
of A-11 is Cinderella.
Genius expresses the NL and Skunk side of the gene pool. Cindy expresses the Durban and haze side.
imho, for the A-11 to have 2 phenotypes
the flying dutchman in the F1, one of which is fluffy, sweet, and floppy like Durban, means
that the Durban gene is in both Apollo and Cindy." - Zorro “I grew Sensi Seeds NL#5 and it was one of the best plants I had ever seen. VERY distinctive aroma and taste,
I agree with Skunkman, its like a psychedelic couchlock, the buzz goes for loooong. Plus its one of the best
indoor plants I ever saw, very short and compact, mega-phat top-cola, pretty fast (8 weeks), wont grow much
longer after inducing bloom, excellent flower/leaf ratio. I had good 400 gr./s.m. which I consider nice. Only
drawback I noticed was you better watch the air humidity, they have a tendency to catch bud rot, and the colas
are just too fat and sticky so the air won’t go into. But when you keep moisture down to max. 50% rh. you
should do well. To my
mss experience they are true-breeding, but on the other hand I heard that too much
inbreeding out of a small number of species might cause some problems and show up
Cannabis Information some indica aspects
you may not want to have. I heard of NL#5 F2 that smelled and tasted like shit and had a very dull buzz.” -
huzzit
"(For multiple sclerosis) my friend is currently using a pure indica (NL#5) with good results..." - pot newz“I grew Sensi Seeds NL5 and it was one of the best plants I had ever seen. VERY distinctive aroma and taste,
I agree with Skunkman,
hempdepot its like a psychedelic couchlock, the buzz goes for loooong. Plus its one of the best
indoor plants I ever saw, very short and compact, mega-phat top-cola, pretty fast (8 weeks), wont grow much
longer after inducing bloom, excellent flower/leaf ratio. I had good 400
hempdepot gr./s.m. which I consider nice. Only
drawback I noticed was you better watch the air humidity, they have a tendency to catch bud rot, and the colas
are just too fat and sticky so the air won’t go into. But when you keep moisture down to max. 50% rh. you
should do well.
Cannabis Information To my experience they are true-breeding, but on the other hand I heard that too much
inbreeding out of a small number of species might cause some problems and show up some indica aspects
you may not want to have. I heard of NL5 F2 that smelled and tasted like shit and had a very dull buzz.
” -
huzzit
"(For multiple sclerosis) my friend is currently using a pure indica (NL5) with good results.
.
.
" - pot newz
hemp depot
“These buds are army-green colored, crystally, and evenly covered with long dark orange (almost brown) hairs.
Broken up, these Cannabis Ska P buds release the scent of sweet freshly cut grass or even hay with some slightly skunky
undertones. The smoke is smooth,
hempseed non-expansive and has a mild sweet taste. Although the high does not hit
you right away, it first creeps through your body making you feel stoned and Kali Mist then only moderately effects your
cerebrum, allowing you to concentrate on any task at hand. **” – Homepage Amsterdam
s are well mixed in the spore
syringe. Often, it takes several tries to get the spores fully broken apart
and well mixed.
If the spores in the print have been dried and are not fresh, it is best to
wait six hours to use the spore syringe. The spores need to rehydrate.
If
your in a hurry, the spores can still rehydrate in the culture jars.
How to Make a Spore Print
Once you have a mature mushroom, you are in a position to make a
spore print and use it to continue cultivation of mushrooms. The cap
should be harvested when the mushroom cap has become flat or is
starting to invert.
Sterility is key. Adaptation-25 Be careful not to do anything that will
compromise the sterility of your spore print. The typical procedure is
to cut the stalk off of a mature mushroom very close to the cap. A
sterilized knife or razor blade is used to do this. The cap is then laid on
a sterile piece of tissue paper or card stock and a small glass set over it.
The glass is needed for two reasons. First, it keeps the spore print
insulated from airborne contaminates. Secondly, it helps keep the
humidity high so the mushroom cap can continue to live and drop its
spores. One note of caution. Some humidity usually needs to be
(10 of 15) [5/1/2002 6:54:20 PM]
How To Grow Magic Mushrooms The Magic Mushroom Growers Guide (page 3)
allowed to escape. You want the environment inside the glass to be
slightly less humid than the environment in which the mushroom was
grown. If you have problems getting a cap to drop its spores, try using
a piece of paper for the print that fits entirely inside the glass and
spreading out a wash cloth flat on the table. Let the edge of the glass
seal to the wash cloth instead of the paper. This will usually allow
enough humidity to escape to
Whitewidow cause the cap to drop spores.
If everything goes well, after a day or two the cap will drop its spores.
Adaptation-26 There will be a purple-brown dust underneath the cap.
These are the spores.
Eye glass lens paper is good source of sterile tissue paper. A box of
waxy tissue paper that deli's use to pick up donuts and rolls is another
excellent source of sterile tissue paper. Card stock (such as a recipe
card) is a bit easier to use later when you want to prepare a spore
syringe, but you have to expend the extra effort up front to sterilize it.
To use card stock, place in a 425 degree F. oven for 15 minutes.
Let it
cool with a glass over it before you place the cap on it.
Once you have a spore print on the paper, remove the glass and cap.
Fold the spore print in half and seal the edges so air can not get in. A
piece of scotch tape on each side will do nicely. The spores will stay
viable for 18 months if they are kept in a cool, dry and dark spot. If
you place a small amount of desiccant in the bottom of a film container
and place a cotton ball on top of the desiccant, you have an ideal
container to keep the spore print. The cotton ball will keep the
desiccant from touchis are well mixed in the spore
syringe.
Often, it takes several tries to get the spores fully broken apart
and well mixed.
If the spores in the print have been dried and are not fresh, it is best to
wait six hours to use the spore syringe. The spores need to rehydrate. If
your in a hurry, the spores can still rehydrate in the culture jars.
How to Make a Spore Print
Once you have a mature mushroom, you are in a position to make a
spore print and use it to continue cultivation of mushrooms. The cap
should be harvested when the mushroom cap has become flat or is
starting to invert.
Sterility is key. Adaptation-25 Be careful not to do anything that will
compromise the sterility of your spore print.
The typical procedure is
to cut the stalk off of a mature mushroom very close to the cap. A
sterilized knife
seeds+ or razor blade is used to do this. The cap is then laid on
a sterile piece of tissue paper or card stock and a small glass set over it.
The glass is needed for two reasons.
First, it keeps the spore print
insulated from airborne contaminates. Secondly, it helps keep the
humidity high so the mushroom cap can continue to live and drop its
spores. One note of caution. Some humidity usually needs to be
(10 of 15) 5/1/2002 6:54:20 PM]
How To Grow Magic Mushrooms The Magic Mushroom Growers Guide (page 3)
allowed to escape. You want the environment inside the glass to be
slightly less humid than the environment in which
canibus cup
the mushroom was
grown.
If you have problems getting a cap to drop its spores, try using
a piece of paper for the print that fits entirely inside the glass and
spreading out a wash cloth flat on the table. Let the edge of the glass
seal to the wash cloth instead of the paper. This will usually allow
enough humidity to escape to cause the cap to drop spores.
If everything goes well, after a day or two the cap will drop its spores.
Adaptation-26 There will be a purple-brown dust underneath the cap.
These are the spores.
Eye glass lens paper is good source of sterile tissue paper. A box of
waxy tissue paper that deli's use to pick up donuts and rolls is another
excellent source of sterile tissue paper. Card stock (such as a recipe
card) is a bit easier to use later when you want to prepare a spore
syringe, but you have to expend the extra effort up front to sterilize it.
To use card stock, place in a 425 degree F. oven for 15 minutes. Let it
cool with a glass over it before you place the cap on it.
Once you have a spore print on the paper, remove the glass and cap.
Fold the spore print in half and seal the edges so air can not get in. A
piece of scotch tape on each side will do nicely.
The spores will stay
viable for 18 months if they are kept in a cool, dry and dark spot. If
you place a small amount of desiccant in the bottom of a film container
and place a cotton ball on top of the desiccant,
Cannabis Seeds London you have an ideal
container to keep the spore print. The cotton ball will keep the
desiccant from touchis are well mixed in the spore
syringe. Often, it takes several tries to get the spores fully broken apart
and well mixed.
If the spores in the print have been dried and are not fresh, it is best to
wait six hours to use the spore syringe. The spores need to rehydrate. If
your in a hurry, the spores can still rehydrate in the culture jars.
How to Make a Spore Print
Once you have a mature mushroom, you are in a position to make a
spore print and use it to continue cultivation of mushrooms.
The cap
should be harvested when the mushroom cap has become flat or is
starting to invert.
Sterility is key. Adaptation-25 Be careful not to do anything that will
compromise the sterility of your spore print. The typical procedure is
to cut the stalk off of a mature mushroom very close to the cap. A
sterilized knife or razor blade is used to do this. The cap is then laid on
a sterile piece of tissue paper or card stock and a small glass set over it.
The glass is needed for two reasons. First, it keeps the spore print
insulated from airborne contaminates.
Secondly, it helps keep the
humidity high so the mushroom cap can continue to live and drop its
spores. One note of caution. Some humidity usually needs to be
(10 of 15) 5/1/2002 6:54:20 PM
How To Grow Magic Mushrooms The Magic Mushroom Growers Guide (page 3)
allowed to escape. You want the environment inside the glass to be
slightly less humid than the environment in which the mushroom was
grown.
If you have problems getting a cap to drop its spores, try using
a piece of paper for the print that fits entirely inside the glass and
spreading out a wash cloth flat on the table. Let the edge of the glass
seal to the wash cloth instead of the paper.
This will usually allow
enough humidity to escape to cause the cap to drop spores.
If everything goes well, after a day or two the cap will drop its spores.
Adaptation-26 There will be a purple-brown dust underneath the cap.
These are the spores.
Eye glass lens paper is good source of sterile tissue paper. A box of
waxy tissue paper that deli's use to pick up donuts and rolls is another
excellent source of sterile tissue paper. Card stock (such as a recipe
card) is a bit easier to use later when you want to prepare a spore
syringe, but you have to expend the extra effort up front to sterilize it.
To use card stock, place in a 425 degree F. oven for 15 minutes.
Let it
cool with a glass over it before you place the cap on it.
Once you have a spore print on the paper, remove the glass and cap.
Fold the spore print in half and seal the edges so air can not get in. A
piece of scotch tape on each side will do nicely. The spores will stay
viable for 18 months if they are kept in a cool, dry and dark spot. If
you place a small amount of desiccant in the bottom of a film container
and place a cotton ball on top of the desiccant, you have an ideal
container to keep the spore print. The cotton ball will keep the
desiccant from touchis are well mixed in the spore
syringe. Often, it takes several tries to get the spores fully broken apart
and well mixed.
If the spores in the print have been dried and are not fresh, it is best to
wait six hours to use the spore syringe. The spores need to rehydrate. If
your in a hurry, the spores can still rehydrate in the culture jars.
How to Make a Spore Print
Once you have a mature mushroom, you are in a position to make a
spore print and use it to continue cultivation of mushrooms. The cap
should be harvested when the mushroom cap has become flat or is
starting to invert.
Sterility is key. Adaptation-25 Be careful not to do anything that will
compromise the sterility of your spore print. The typical procedure is
to cut the stalk off of a mature mushroom very close to the cap. A
sterilized knife or razor blade is used to do this. The cap is then laid on
a sterile piece of tissue paper or card stock and a small glass set over it.
The glass is needed for two reasons.
First, it keeps the spore print
insulated from airborne contaminates. Secondly, it helps keep the
humidity high so the mushroom cap can continue to live and drop its
spores. One note of caution. Some humidity usually needs to be
(10 of 15) 5/1/2002 6:54:20 PM
How To Grow Magic Mushrooms The Magic Mushroom Growers Guide (page 3)
allowed to escape. You want the environment inside the glass to be
slightly less humid than the environment in which the mushroom was
grown. If you have problems getting a cap to drop its spores, try using
a piece of paper for the print that fits entirely inside the glass and
spreading out a wash cloth flat on the table. Let the edge of the glass
seal to the wash cloth instead of the paper. This will usually allow
enough humidity to escape to cause the cap to drop spores.
If everything goes well, after a day or two the cap will drop its spores.
Adaptation-26 There will be a purple-brown dust underneath the cap.
These are the spores.
Eye glass lens paper is good source of sterile tissue paper. A box of
waxy tissue paper that deli's use to pick up donuts and rolls is another
excellent source of sterile tissue paper.
Card stock (such as a recipe
card) is a bit easier to use later when you want to prepare a spore
syringe, but you have to expend the extra effort up front to sterilize it.
To use card stock, place in a 425 degree F. oven for 15 minutes. Let it
cool with a glass over it before you place the cap on it.
Once you have a spore print on the paper, remove the glass and cap.
Fold the spore print in half and seal the edges so air can not get in. A
piece of scotch tape on each side will do nicely. The spores will stay
viable for 18 months if they are kept in a cool, dry and dark spot. If
you place a small amount of desiccant in the bottom of a film container
and place a cotton ball on top of the desiccant, you have an ideal
container to keep the spore print. The cotton ball will keep the
desiccant from touchi
“This strain may be the "Holy Grail". The result of painstakingly backcrossing a VERY RARE female to her male
progeny over 3 generations. This hybrid was specifically bred for indoor cultivation. Short statured & heavily
branched, this plant grows LONG, dense colas with an EXTREMELY high flower/leaf ratio and OUTRAGEOUS resin
production. The breeder has observed a "giant leap" in potency with each progressive generation and, as
expected, Cinderella 99 has topped all previous results - her high is heavily influenced by Haze; clear, energetic
& devastatingly psychoactive. A plant with all of the above is rare enough, but Cinderella 99 finishes flowering
after a scant 50 days of 12/12! Above-average yields of crystal covered buds reeking of tropical fruit aromas can
be harvested every other month once a mother plant is selected and asexually propagated. One final accolade -
preliminary results from the breeder indicate Cinderella 99 will breed true..." -Brothers Grimm seedbank
s are well mixed in the spore
syringe. Often, it takes several tries to get the spores fully broken apart
and well mixed.
If the spores in the print have been dried and are not fresh, it is best to
wait six hours to use the spore syringe. The spores need to rehydrate. If
your in a hurry, the spores can still rehydrate in the culture jars.
How to Make a Spore Print
Once you have a mature mushroom, you are in a position to make a
spore print and use it to continue cultivation of mushrooms. The cap
should be harvested when the mushroom cap has become flat or is
starting to invert.
Sterility is key. Adaptation-25 Be careful not to do anything that will
compromise the sterility of your spore print. The typical procedure is
to cut the stalk off of a mature mushroom very close to the cap. A
sterilized knife or razor blade is used to do this. The cap is then laid on
a sterile piece of tissue paper or card stock and a small glass set over it.
The glass is needed for two reasons. First, it keeps the spore print
insulated from airborne contaminates. Secondly, it helps keep the
humidity high so the mushroom cap can continue to live and drop its
spores. One note of caution. Some humidity usually needs to be
(10 of 15) [5/1/2002 6:54:20 PM]
How To Grow Magic Mushrooms The Magic Mushroom Growers Guide (page 3)
allowed to escape.
You want the environment inside the glass to be
slightly less humid than the environment in which the mushroom was
grown. If you have problems getting a cap to drop its spores, try using
a piece of paper for the print that fits entirely inside the glass and
spreading out a wash cloth flat on the table.
Let the edge of the glass
seal to the wash cloth instead of the paper. This will usually allow
enough humidity to escape to cause the cap to drop spores.
If everything goes well, after a day or two the cap will drop its spores.
Adaptation-26 There will be a purple-brown dust underneath the cap.
These are the spores.
Eye glass lens paper is good source of sterile tissue paper. A box of
waxy tissue paper that deli's use to pick up donuts and rolls is another
excellent source of sterile tissue paper. Card stock (such as a recipe
card) is a bit easier to use later when you want to prepare a spore
syringe, but you have to expend the extra effort up front to sterilize it.
To use card stock, place in a 425 degree F. oven for 15 minutes. Let it
cool with a glass over it before you place the cap on it.
Once you have a spore print on the paper, remove the glass and cap.
Fold the spore print in half and seal the edges so air can not get in. A
piece of scotch tape on each side will do nicely.
The spores will stay
viable for 18 months if they are kept in a cool, dry and dark spot. If
you place a small amount of desiccant in the bottom of a film container
and place a cotton ball on top of the desiccant, you have an ideal
container to keep the spore print. The cotton ball will keep the
desiccant from touchis are well mixed in the spore
syringe. Often, it takes several tries to get the spores fully broken apart
and well mixed.
If the spores in the print have been dried and are not fresh, it is best to
wait six hours to use the spore syringe. The spores need to rehydrate. If
your in a hurry, the spores can still rehydrate in the culture jars.
How to Make a Spore Print
Once you have a mature mushroom, you are in a position to make a
spore print and use it to continue cultivation of mushrooms. The cap
should be harvested when the mushroom cap has become flat or is
starting to invert.
Sterility is key. Adaptation-25 Be careful not to do anything that will
compromise the sterility of your spore print. The typical procedure is
to cut the stalk off of a mature mushroom very close to the cap. A
sterilized knife or razor blade is used to do this. The cap is then laid on
a sterile piece of tissue paper or card stock and a small glass set over it.
The glass is needed for two reasons. First, it keeps the spore print
insulated from airborne contaminates. Secondly, it helps keep the
humidity high so the mushroom cap can continue to live and drop its
spores.
One note of caution. Some humidity usually needs to be
(10 of 15) 5/1/2002 6:54:20 PM]
How To Grow Magic Mushrooms The Magic Mushroom Growers Guide (page 3)
allowed to escape. You want the environment inside the glass to be
slightly less humid than the environment in which the mushroom was
grown. If you have problems getting a cap to drop its spores, try using
a piece of paper for the print that fits entirely inside the glass and
spreading out a wash cloth flat on the table. Let the edge of the glass
seal to the wash cloth instead of the paper. This will usually allow
enough humidity to escape to cause the cap to drop spores.
If everything goes well, after a day or two the cap will drop its spores.
Adaptation-26 There will be a purple-brown dust underneath the cap.
These are the spores.
Eye glass lens paper is good source of sterile tissue paper. A box of
waxy tissue paper that deli's use to pick up donuts and rolls is another
excellent source of sterile tissue paper. Card stock (such as a recipe
card) is a bit easier to use later when you want to prepare a spore
syringe, but you have to expend the extra effort up front to sterilize it.
To use card stock, place in a 425 degree F. oven for 15 minutes. Let it
cool with a glass over it before you place the cap on it.
Once you have a spore print on the paper, remove the glass and cap.
Fold the spore print in half and seal the edges so air can not get in. A
piece of scotch tape on each side will do nicely. The spores will stay
viable for 18 months if they are kept in a cool, dry and dark spot. If
you place a small amount of desiccant in the bottom of a film container
and place a cotton ball on top of the desiccant, you have an ideal
container to keep the spore print. The cotton ball will keep the
desiccant from touchis are well mixed in the spore
syringe. Often, it takes several tries to get the spores fully broken apart
and well mixed.
If the spores in the print have been dried and are not fresh, it is best to
wait six hours to use the spore syringe. The spores need to rehydrate. If
your in a hurry, the spores can still rehydrate in the culture jars.
How to Make a Spore Print
Once you have a mature mushroom, you are in a position to make a
spore print and use it to continue cultivation of mushrooms.
The cap
should be harvested when the mushroom cap has become flat or is
starting to invert.
Sterility is key. Adaptation-25 Be careful not to do anything that will
compromise the sterility of your spore print. The typical procedure is
to cut the stalk off of a mature mushroom very close to the cap. A
sterilized knife or razor blade is used to do this. The cap is then laid on
a sterile piece of tissue paper or card stock and a small glass set over it.
The glass is needed for two reasons. First, it keeps the spore print
insulated from airborne contaminates. Secondly, it helps keep the
humidity high so the mushroom cap can continue to live and drop its
spores. One note of caution. Some humidity usually needs to be
(10 of 15) [5/1/2002 6:54:20 PM
How To Grow Magic Mushrooms The Magic Mushroom Growers Guide (page 3)
allowed to escape. You want the environment inside the glass to be
slightly less humid than the environment in which the mushroom was
grown. If you have problems getting a cap to drop its spores, try using
a piece of paper for the print that fits entirely inside the glass and
spreading out a wash cloth flat on the table. Let the edge of the glass
seal to the wash cloth instead of the paper. This will usually allow
enough humidity to escape to cause the cap to drop spores.
If everything goes well, after a day or two the cap will drop its spores.
Adaptation-26 There will be a purple-brown dust underneath the cap.
These are the spores.
Eye glass lens paper is good source of sterile tissue paper.
A box of
waxy tissue paper that deli's use to pick up donuts and rolls is another
excellent source of sterile tissue paper. Card stock (such as a recipe
card) is a bit easier to use later when you want to prepare a spore
syringe, but you have to expend the extra effort up front to sterilize it.
To use card stock, place in a 425 degree F. oven for 15 minutes. Let it
cool with a glass over it before you place the cap on it.
Once you have a spore print on the paper, remove the glass and cap.
Fold the spore print in half and seal the edges so air can not get in. A
piece of scotch tape on each side will do nicely. The spores will stay
viable for 18 months if they are kept in a cool, dry and dark spot. If
you place a small amount of desiccant in the bottom of a film container
and place a cotton ball
dutchmen dutchmen
on top of the desiccant, you have an ideal
container to keep the spore print. The cotton ball will keep the
desiccant
Kc Brains from touchis are well mixed in the spore
syringe. Often, it takes several tries to get the spores fully broken apart
and well mixed.
If the spores in the print have been dried and are not fresh, it is best to
wait six hours to use the spore syringe.
The spores need to rehydrate. If
your in a hurry, the spores can still rehydrate in the culture jars.
How to Make a Spore Print
Once you have a mature mushroom, you are in a position to make a
spore print and use it to continue cultivation of mushrooms. The cap
should be harvested when the mushroom cap has become flat or is
starting to invert.
Sterility is key. Adaptation-25 Be careful not to do anything that will
compromise the sterility of your spore print. The typical procedure is
to cut the stalk off of a mature mushroom very close to the cap. A
sterilized knife or razor blade is used to do this. The cap is then laid on
a sterile piece of tissue paper or card stock and a small glass set over it.
The glass is needed for two reasons. First, it keeps the spore print
insulated from airborne contaminates. Secondly, it helps keep the
humidity high so the mushroom cap can continue to live and drop its
spores. One note of caution. Some humidity usually needs to be
(10 of 15) 5/1/2002 6:54:20 PM
How To Grow Magic Mushrooms The Magic Mushroom Growers Guide (page 3)
allowed to escape. You
dutchmen dutchmen want the environment inside the glass to be
slightly less humid than the environment in which the mushroom was
grown. If you have problems getting a cap to drop its spores, try using
a piece of paper for the print that fits entirely inside the glass and
spreading out a wash cloth flat on the table. Let the edge of the glass
seal to the wash cloth instead of the paper.
This will usually allow
enough humidity to escape to cause the cap to drop spores.
If everything goes well, after a day or two the cap will drop its spores.
Adaptation-26 There will be a purple-brown dust underneath the cap.
These are the spores.
Eye glass lens paper is good source of sterile tissue paper. A box of
waxy tissue paper that deli's use to pick up donuts and rolls is another
excellent source of sterile tissue paper. Card stock (such as a recipe
card) is a bit easier to use later when you want to prepare a spore
syringe, but you have to expend the extra effort up front to sterilize it.
To use card stock, place in a 425 degree F. oven for 15 minutes. Let it
cool with a glass over it before you place the cap on it.
Once you have a spore print on the paper, remove the glass and cap.
Fold the spore print in half and seal the edges so air can not get in. A
piece of scotch tape on each side will do nicely. The spores will stay
viable for 18 months if they are kept in a cool, dry and dark spot. If
you place
dutchmen dutchmen a small amount of desiccant in the bottom of a film container
and place a cotton ball on top of the desiccant, you have an ideal
container to keep the spore print. The cotton ball will keep the
desiccant from touchi
“The Big Bud was the same as usual. The buds are large for sure, but this strain just doesn’t do it for me. They
reached about 15 inches in height and yielded at least an ounce each. I've grown this strain 2 times before
and to be honest I thought it came out poorly originally because they were my first crops, but even this latest
batch, which was grown and dried as perfect as I have ever done, still pales as far as potency goes. This will be
the last time I take up space with this strain.” – James Hetfield “BC Big Bud is a stabilized 65% indica/35% sativa, the Dutch Big Bud (Sensi) is all indica. BC Big Bud has
tremendous resin, its the crystally bud on the cover of the Cannabis Culture #18 (Steve Kubby header), and a
citrusy scent. Usually only available in clone, (hence the crosses, its usually the female in those Romulan x BC
Big Bud or Mikado x BC Big Bud), it is now available in seed (pure) at $50 CN/$40 US for 10 seeds. Giant seeds,
largest I have (not that that information has meaning, seed size has no relevance despite what mythology
persists about them). Very nice smoke, the Dutch Big Bud can be a good yielder like BC Big Bud but the high is
superior in the BC Big Bud version. The leaves in the BC Big Bud variety are more sativa like.” – Marc Emery