Sorten
anyone buying buying from
"Regarding Early Girl, Ed Rosenthal says he knows (it was) developed by Cultivators' Choice in California in the
70's.”
“Early Girl - This is a mostly Indica early variety developed in Fonddecrancannabis Northern California. The plants are compact and
very sturdy, and will tend to grow to one main stem. Very potent, medium yield, with a hashy taste and aroma.
Inbred for Cannabis Ska P 4 generations and carefully selected for quality and earliness. Early Girl is an outstanding choice for
growers seeking an early Indica-type.
"I got NL#5 never had any problems with cloning, also if its real NL#5 (which is Pure NL) it has almost no smell
at all which is great if ya grow indoors. The ones I've seen really fill out
thc
at the end of the flowering cycle, it
sometimes looks like the yield will be marginal and then in the last couple of weeks--bam! I have found this
with most indica strains,
Shivas usually they do not fill out till the last 2-3 weeks of flowering. NL is a great indoor
strain, one of my fav's too." -Unknown"I got NL5 never had any problems with
cloning, also if its real NL5 (which is Pure NL) it has almost no smell
at all which is great if ya grow
anyone buying from pollinatorseedbank indoors. The ones I've seen really fill out at the end of the flowering cycle, it
sometimes looks like the yield will be marginal and then in the last couple of weeks--bam! I have found this
with most indica strains, usually they do not fill out till the last 2-3 weeks of flowering. NL is a great indoor
strain, one of my fav's too." -Unknown “Northern lights #2 = originally a Hindu Kush X Thai cross. It was selectively inbred and developed into a stable
almost all Kush type cross that is mostly indica.”
“I haven't done #5, but # 2 (Oasis) was great. Most people say that the NL strains have little or no taste or
smell, but my experience with #2 was that it had an oniony, garlicky smell and taste. The buzz was it.
Couch-lock, but surprisingly psychoactive, given indica's reputation. I don't think you can go wrong with a strain
that highly touted.” - Skunkman (Big Bud x Skunk #1) 23.25 oz. Cured, VERY well manicured. Also made 2 lb of butter, that turned out way too
strong) and 10 grams of hash. There were 8 1/2 plants grown from clone(one was a complete runt, I don't
know why I even let her live). Plants were vegged in an aeroponic/NFT system for 3 weeks under a 1000MH with
an AgroSun bulb. They were about 18-20 inches tall when switched. Each plant was topped twice. Flowering was
in an NFT system. The first 2 weeks a single 1000MH w/ AgroSun was used. A second identical light was added
at the third week. Flowering took about 70 days. These were the most crystallized plants of this variety that
I've ever grown. Slow cured over 1 1/2 months. First on newspaper, then into paper bags, then into mason jars.
Smell is incredible. High is incredible. Normally I find BB a little less potent that I'd like. This crop just floors
me. High starts out mellow, upbeat, then when you start the second round of bong hits it just hits you like a
wave. Immediate couch melt. Cancel your plans, you're not going anywhere. But it lets your mind stay
somewhat sharp, which is the best thing about it. Overall I was pretty pleased with this harvest. I had a couple
of problems in the early weeks of flowering with mites, and then nearer the end the cold started to set in a bit.
So considering that I was pleased with the yield. Although it did suffer the typical Big Bud problem of slightly
looser buds. I had one plant that was a monster! A good 8 inches taller than all the other plants, I ended up
having to tie her down. 4 huge colas each around 4x11. That plant probably yielded almost 4 ounces alone -
Content Green Spirit is a hybrid of Big Bud and Skunk #1. Was developed because Big Bud itself is not a very
consistent strain, with very big differences among individual plants. By crossing Big Bud and Skunk #1, Green
Spirit became quite homogeneous. Good results under artificial lights. Clear and strong high. The plants have
an explosive flowering trait and are extremely resinous. Very high yield. Northern Lights
“pure Indica 88/89/90
An absolute must for the indoor grower! For the last couple of years the Northern Lights® has dominated the
various Harvest Festivals. Through selective breeding we have succeeded in producing one of the most powerful
plants in the world. On top of that, we have developed a strain highly adapted for indoor growing: compact,
powerful with a good yield and exceptional resin production. The most lucrative plant for the indoor grower.
Flowering: 45-50 days.
Height: 100-125 cm.
Yield: up to 125 gr.” – Sensi Seed Bank catalog
Its a simple, easy and very small plant growing 30 - 50 cm, which is perfect flowering period 6 - 7 weeks harvest 8-9 week after germ stoned or high natural high - indica. Discount cheap marijuana cannabis seeds specials flowering chamber this week flowering chamber earlier this week swept it out and washed the tue may 6, 2003 ganjis grow grow pot from the dutch masters two of hollandaposs cannabis. Delta-9 labs - cannabis seeds - dampkring nl top 44 is our fastest flowering variety which under ideal conditions can be ready in 6 weeks feminized is a strong easy to grow cannabis seeds. How to grow marijuana outdoors - guide to guides highboldtage the cannabis grow bible culture tutorial plant on what to feed it at week two diy weed growing cannabis scrog using 1212 dutch method of growing marijuana using 6 inch. Cannabis growing, flowering 6 weeks strains of marijuana cannabis often grow a darker green after flowering they will be mature in 6 to 8 weeks.
“Northern lights #2 = originally a Hindu Kush X Thai cross. It was selectively inbred and developed into a stable
almost all Kush type cross that is mostly indica.”
“I haven't done #5, but # 2 (Oasis) was great. Most people say that the NL strains have little or no taste or
smell, but my experience with #2 was that it had an oniony, garlicky smell and taste. The buzz was it.
Couch-lock, but surprisingly psychoactive, given indica's reputation. I don't think you can go wrong with a strain
that highly touted.” - Skunkman s are well mixed in the spore
syringe. Often, it takes several tries to get the spores fully broken apart
and well mixed.
If the spores in the print have been dried and are not fresh, it is best to
wait six hours to use the spore syringe. The spores need to rehydrate. If
your in a hurry, the spores can still rehydrate in the culture jars.
How to Make a Spore Print
Once you have a mature mushroom, you are in a position to make a
spore print and use it to continue cultivation of mushrooms. The cap
should be harvested when the mushroom cap has become flat or is
starting to invert.
Sterility is key. Adaptation-25 Be careful not to do anything that will
compromise the sterility of your spore print. The typical procedure is
to cut the stalk off of a mature mushroom very close to the cap. A
sterilized knife or razor blade is used to do this. The cap is then laid on
a sterile piece of tissue paper or card stock and a small glass set over it.
The glass is needed for two reasons. First, it keeps the spore print
insulated from airborne contaminates. Secondly, it helps keep the
humidity high so the mushroom cap can continue to live and drop its
spores. One note of caution. Some humidity usually needs to be
(10 of 15) 5/1/2002 6:54:20 PM]
How To Grow Magic Mushrooms The Magic Mushroom Growers Guide (page 3)
allowed to escape. You want the environment inside the glass to be
slightly less humid than the environment in which the mushroom was
grown. If you have problems getting a cap to drop its spores, try using
a piece of paper for the print that fits entirely inside the glass and
spreading out a wash cloth flat on the table. Let the edge of the glass
seal to the wash cloth instead of the paper. This will usually allow
enough humidity to escape to cause the cap to drop spores.
If everything goes well, after a day or two the cap will drop its spores.
Adaptation-26 There will be a purple-brown dust underneath the cap.
These are the spores.
Eye glass lens paper is good source of sterile tissue paper. A box of
waxy tissue paper that deli's use to pick up donuts and rolls is another
excellent source of sterile tissue paper. Card stock (such as a recipe
card) is a bit easier to use later when you want to prepare a spore
syringe, but you have to expend the extra effort up front to sterilize it.
To use card stock, place in a 425 degree F. oven for 15 minutes. Let it
cool with a glass over it before you place the cap on it.
Once you have a spore print on the paper, remove the glass and cap.
Fold the spore print in half and seal the edges so air can not get in. A
piece of scotch tape on each side will do nicely. The spores will stay
viable for 18 months if they are kept in a cool, dry and dark spot. If
you place a small amount of desiccant in the bottom of a film container
and place a cotton ball on top of the desiccant, you have an ideal
container to keep the spore print. The cotton ball will keep the
desiccant from touchi
Sk 1 Cannabis Flowering Time
“
I created a 'goblet' effect outwards around the top of the wire-tube, and this stopped the damage. Having been eaten back to about 18" in early
July, the plants reached about 6' by week-1 Oct. During the whole summer, there was no single week that they
were not rained on VERY heavily, and for the last month of their lives they were in perpetual cloud/100%
moisture. Only one plant showed any signs of mold (and this one showed only small patches)- which I was
extremely pleased with.
Lights buy seeds seeds
cannabis Lights align="right"> I created a 'goblet' effect outwards around the top of the wire-tube, and this stopped the damage. Having been eaten back to about 18" in early
July,
seed banks the plants reached about
seed banks 6' by week-1 Oct. During the whole summer, there was no single week that they
were not rained on VERY heavily, and for the last month of their lives they were in perpetual cloud/100%
moisture. Only one plant showed any signs of mold (and this one showed only small patches)- which I
Sorten was
extremely pleased with.
I would have to say to give Blueberry a shot. I received mine from BC Seeds, WOW. I used to grow with stash
seeds. No more. Blueberry in 65 days budding time produced 1.8 Oz per s.f., with 55 watts per s.f., vented
highly. The strength and the taste were a 10 on 1-10 with skunk #1 being a 5. "We have been working from a m39 mother plant that is from 1987. This is absolutely the most powerful strain
I have ever come across. I have purchased & grown many of the newer bragged on strains and still am looking
for something that will even come close to this strain. I'm not saying that this variety is the most potent, just
that in my over 15 yr. search this is what I've found to be the strongest so far."-Clone
"M39 by SSSC was "Basic#5"/Sk#1, but I BELIEVE "Basic#5" was actually NL#5, but SSSC weren't allowed to say
so. You're actually looking for NL#5/Sk#1 which is available from Sensi Seed Bank, they call it "ShivaSkunk".
–MrSoul
Blow-by-blow description of the generations:
P.50 = Heavy, single-cola type plants with mellow high (too much influence from the ShivaSkunk) Sweet fruity
scent/flavor. Unstable in most traits - for example, 10 days difference in fastest/slowest maturation period in a
group of 20 seedlings. G 13
P.75 = Plants leaning MUCH more in the direction of Princess in floral cluster and bud structure, scent/flavor
turned
wwwcanabis more "tropical" like pineapple.
The stability was becoming better - two Marijuana Cannabis Seeds major phenotypes; short & dense
(potent too) or tall/HUGE (Not so potent).
P.88 = Renamed Cinderella 88 when first released on the market. It grows fast and produces excellent yields of
FROSTY buds in 7 weeks! Generally uniform seedlings with minor differences in floral formation and some height
variance, but the smoke is quite consistent from all plants - Dense, heavy nuggets of fruity scented & flavored
(like wild berries) and covered in resin glands, the dried buds
wwwcanabis
have distinctly ORANGE pistils.
While the 5-HT precursors tryptophan and 1-5-HTP cause an increase in serum prolactin concentration, a combination of 1-5-HTP with a peripheral decarboxylase inhibitor was found to reduce the serum prolactin concentration. This combination seemed to behave like a DA agonist. This effect is not produced by the decarboxylase inhibitor per se. A possible explanation is that 5-HTP is converted to 5-HT in CA-ergic neurons, that 5-HT supersedes the CA from the stores, and that some of the CA reach the synaptic cleft and stimulate CA receptors. Another possible explanation is that 5-HTP decarboxylase is centrally inhibited as well, and that an effect of 5-HTP itself is involved here. In view of the observations made it is doubtful whether the therapeutic effect of 5-HTP combined with a peripheral decarboxylase inhibitor in depressions and myoclonus can in fact be atributed to activation of central serotonergic systems. I grew this last year outdoors. about 5' tall at harvest, lots of short side branches with plenty of buds. yield
was about 4 oz. of average quality weed. excellent hashy taste which peaked at about 1 month of curing and
then started to decline. high was average and didn't last very long. maybe due to accidental pollination.
susceptible to bud mold in high humidity.” dr.atomic "We have been working from a m39 mother plant that is from 1987. This is absolutely the most powerful strain
I have ever come across. I have purchased & grown many of the newer bragged on strains and still am looking
for something that will even come close to this strain. I'm not saying that this variety is the most potent, just
that in my over 15 yr. search this is what I've found to be the strongest so far."-Clone
"M39 by SSSC was "Basic#5"/Sk#1, but I BELIEVE "Basic#5" was actually NL#5, but SSSC weren't allowed to say
so. You're actually looking for NL#5/Sk#1 which is available from Sensi Seed Bank, they call it "ShivaSkunk".
–MrSoul"We have been working from a m39 mother plant that is from 1987.
Photo Cannabis This is absolutely the most powerful strain
I have ever come across.
I have purchased & grown many of the newer bragged on strains and still am looking
for something that will even come close to this strain. I'm not saying that this variety is the most potent, just
that in my over 15 yr. search this is what I've found to be the strongest so far."-Clone
"M39 by SSSC was "Basic5"/Sk1, but I BELIEVE "Basic5" was actually NL5, but SSSC weren't allowed to say
so. You're actually looking for NL5/Sk1 which is available from Sensi Seed Bank, they call it "ShivaSkunk".
–MrSoul Most of the plants I grew with seeds bought in November are about 45" tall, but I bend then over almost in half
so they are only about 26" high not including the rockwool. I get lots of various size buds that are pointy on
top when fully mature, with a long top branch of buds about a 18” long that you could call a spread-out cola.
One plant I pruned in veg. Toped at the 4th node than again a week later. It created 4 main colas with only 4
or 5 side branches.. It is just about ready. It will be less than 30” mature (not bent at all) and very compact
not as wide) compared to the other Super Silver Hazes (and much easier to manage). For SOG, you would need
to be a master at controlling the growth patterns. But if you know how, you could get (4) four cola Super Silver
Hazes per Sq. foot, or at least 3 that could yield at least 22 grams of dry manicured bud.
s are well mixed in the spore
syringe. Often, it takes several tries to get the spores fully broken apart
and well mixed.
If the
Cannabis home Cannabis spores in the print have been dried and are not fresh, it is best to
wait six hours to use the spore syringe. The spores need to rehydrate. If
your in a hurry, the spores can still rehydrate in the culture jars.
How to Make a Spore Print
Once you have a mature mushroom, you are in a position to make a
spore print and use it to continue cultivation of mushrooms.
The cap
should be harvested when the mushroom cap has become flat or is
starting to invert.
Sterility is key. Adaptation-25 Be careful not to do anything that will
compromise the sterility of your spore print. The typical procedure is
to cut the stalk off of a mature mushroom very close to the cap. A
sterilized knife or razor blade is used to do this. The cap is then laid on
a sterile piece of tissue paper or card stock and a small glass set over it.
The glass is needed for two reasons. First, it keeps the spore print
insulated from airborne contaminates. Secondly, it helps keep the
humidity high so the mushroom cap can continue to live and drop its
spores. One note of caution. Some humidity usually needs to be
(10 of 15) [5/1/2002 6:54:20 PM]
How To Grow Magic Mushrooms The Magic Mushroom Growers Guide (page 3)
allowed to escape. You want the environment inside the glass to be
slightly less humid than the environment in which the mushroom was
grown. If you have problems getting a cap to drop its spores, try using
a piece of paper for the print that fits entirely inside the glass and
spreading out a wash cloth flat on the table. Let the edge of the glass
seal to the wash cloth instead of the paper. This will usually allow
enough humidity to escape to cause the cap to drop spores.
If everything goes well, after a day or two the cap will drop its spores.
Adaptation-26 There will be a purple-brown dust underneath the cap.
These are the spores.
Eye glass lens paper is good source of sterile tissue paper.
A box of
waxy tissue paper that deli's use to pick up donuts and rolls is another
excellent source of sterile tissue paper.
Card stock (such as a recipe
card) is a bit easier to use later when you want to prepare a spore
syringe, but you have to expend the extra effort up front to sterilize it.
To use card stock, place in a 425 degree F. oven for 15 minutes. Let it
cool with a glass over it before you place the cap on it.
Once you have a spore print on the paper, remove the glass and cap.
Fold the spore print in half and seal the edges so air can not get in. A
piece of scotch tape on each side will do nicely.
The spores will stay
viable for 18 months if they are kept in a cool, dry and dark spot. If
you place a small amount of desiccant in the bottom of a film container
and place a cotton ball on top of the desiccant, you have an ideal
container to keep the spore print. The cotton ball will keep the
desiccant from touchis are well mixed in the spore
syringe.
Often, it takes several tries to get the spores fully broken apart
and well mixed.
If the spores in the print have been dried and are not fresh, it is best to
wait six hours to use the spore syringe. The spores need to rehydrate.
If
your in a hurry, the spores can still rehydrate in the culture jars.
How to Make a Spore Print
Once you have a mature mushroom, you are in a position to make a
spore print and use it to continue cultivation of mushrooms. The cap
should be harvested when the mushroom cap has become flat or is
starting to invert.
Sterility is key. Adaptation-25 Be careful not to do anything that will
compromise the sterility of your spore print. The typical procedure is
to cut the stalk off of a mature mushroom very close to the cap. A
sterilized knife or razor blade is used to do this. The cap is then laid on
a sterile piece of tissue paper or card stock and a small glass set over it.
The glass is needed for two reasons. First, it keeps the spore print
insulated from airborne contaminates. Secondly, it helps keep the
humidity high so the mushroom cap can continue to live and drop its
spores. One note of caution. Some humidity usually needs to be
(10 of 15) 5/1/2002 6:54:20 PM]
How To Grow Magic Mushrooms The Magic Mushroom Growers Guide (page 3)
allowed to escape. You want the environment inside the glass to be
slightly less humid than the environment in which the mushroom was
grown. If you have problems getting a cap to drop its spores, try using
a piece of paper for the print that fits entirely inside the glass and
spreading out a wash cloth flat on the table. Let the edge of the glass
seal to the wash cloth instead of the paper. This will usually allow
enough humidity to escape to cause the cap to drop spores.
If everything goes well, after a day or two the cap will drop its spores.
Adaptation-26 There will be a purple-brown dust underneath the cap.
These are the spores.
Eye glass lens paper is good source of sterile tissue paper. A box of
waxy tissue paper that deli's use to pick up donuts and rolls is another
excellent source of sterile tissue paper.
Card stock (such as a recipe
card) is a bit easier to use later when you want to prepare a spore
syringe, but you have to expend the extra effort up front to sterilize it.
To use card stock, place in a 425 degree F. oven for 15 minutes.
Let it
cool with a glass over it before you place the cap on it.
Once you have a spore print on the paper, remove the glass and cap.
Fold the spore print in half and seal the edges so air can not get in. A
piece of scotch tape on each side will do nicely. The spores will stay
viable for 18 months if they are kept in a cool, dry and dark spot. If
you place a small amount of desiccant in the bottom of a film container
and place a cotton ball on top of the desiccant, you have an ideal
container to keep the spore print.
The cotton ball will keep the
desiccant from touchis are well mixed in the spore
syringe. Often, it takes several tries to get the spores fully broken apart
and well mixed.
If the spores in the print have been dried and are not fresh, it is best to
wait six hours to use the spore syringe. The spores need to rehydrate. If
your in a hurry, the spores can still rehydrate in the culture jars.
How to Make a Spore Print
Once you have a mature mushroom, you are in a position to make a
spore print and use it to continue cultivation of mushrooms. The cap
should be harvested when the mushroom cap has become flat or is
starting to invert.
Sterility is key. Adaptation-25 Be careful not to do anything that will
compromise the sterility of your spore print.
The typical procedure is
to cut the stalk off of a mature mushroom very close to the cap. A
sterilized knife or razor blade is used to do this. The cap is then laid on
a sterile piece of tissue paper or card stock and a small glass set over it.
The glass is needed for two reasons. First, it keeps the spore print
insulated from airborne contaminates. Secondly, it helps keep the
humidity high so the mushroom cap can continue to live and drop its
spores. One note of caution. Some humidity usually needs to be
(10 of 15) 5/1/2002 6:54:20 PM
How To Grow Magic Mushrooms The Magic Mushroom Growers Guide (page 3)
allowed to escape.
You want the environment inside the glass to be
slightly less humid than the environment in which the mushroom was
grown. If you have problems getting a cap to drop its spores, try using
a piece of paper for the print that fits entirely inside the glass and
spreading out a wash cloth flat on the table. Let the edge of the glass
seal to the wash cloth instead of the paper. This will usually allow
enough humidity to escape to cause the cap to drop spores.
If everything goes well, after a day or two the cap will drop its spores.
Adaptation-26 There will be a purple-brown dust underneath the cap.
These are the spores.
Eye glass lens paper is good source of sterile tissue paper.
A box of
waxy tissue paper that deli's use to pick up donuts and rolls is another
excellent source of sterile tissue paper. Card stock (such as a recipe
card) is a bit easier to use later when you want to prepare a spore
syringe, but you have to expend the extra effort up front to sterilize it.
To use card stock, place in a 425 degree F. oven for 15 minutes. Let it
cool with a glass over it before you place the cap on it.
Once you have a spore print on the paper, remove the glass and cap.
Fold the spore print in half and seal the edges so air can not get in. A
piece of scotch tape on each side will do nicely. The spores will stay
viable for 18 months if they are kept in a cool, dry and dark spot. If
you place a small amount of desiccant in the bottom of a film container
and place a cotton ball on top of the desiccant, you have an ideal
container to keep the spore print. The cotton ball will keep the
desiccant from touchis are well mixed in the spore
syringe. Often, it takes several tries to get the spores fully broken apart
and well mixed.
If the spores in the print have been dried and are not fresh, it is best to
wait six hours to use the spore syringe. The spores need to rehydrate. If
your in a hurry, the spores can still rehydrate in the culture jars.
How to Make a Spore Print
Once you have a mature mushroom, you are in a position to make a
spore print and use it to continue cultivation of mushrooms.
The cap
should be harvested when the mushroom cap has become flat or is
starting to invert.
Sterility is key. Adaptation-25 Be careful not to do anything that will
compromise the sterility of your spore print. The typical procedure is
to cut the stalk off of a mature mushroom very close to the cap. A
sterilized knife or razor blade is used to do this. The cap is then laid on
a sterile piece of tissue paper or card stock and a small glass set over it.
The glass is needed for two reasons.
First, it keeps the spore print
insulated from airborne contaminates. Secondly, it helps keep the
humidity high so the mushroom cap can continue to live and drop its
spores.
One note of caution. Some humidity usually needs to be
(10 of 15) 5/1/2002 6:54:20 PM
How To Grow Magic Mushrooms The Magic Mushroom Growers Guide (page 3)
allowed to escape. You want the environment inside the glass to be
slightly less humid than the environment in which the mushroom was
grown. If you have problems getting a cap to drop its spores, try using
a piece of paper for the print that fits entirely inside the glass and
spreading out a wash cloth flat on the table. Let the edge of the glass
seal to the wash cloth instead of the paper.
This will usually allow
enough humidity to escape to cause the cap to drop spores.
If everything goes well, after a day or two the cap will drop its spores.
Adaptation-26 There will be a purple-brown dust underneath the cap.
These are the spores.
Eye glass lens paper is good source of sterile tissue paper. A box of
waxy tissue paper that deli's use to pick up donuts and rolls is another
excellent source of sterile tissue paper. Card stock (such as a recipe
card) is a bit easier to use later when you want to prepare a spore
syringe, but you have to expend the extra effort up front to sterilize it.
To use card stock, place in a 425 degree F. oven for 15 minutes. Let it
cool with a glass over it before you place the cap on it.
Once you have a spore print on the paper, remove the glass and cap.
Fold the spore print in half and seal the edges so air can not get in. A
piece of scotch tape on each side will do nicely. The spores will stay
viable for 18 months if they are kept in a cool, dry
Acheter Du Cannabis and dark spot. If
you place a small amount of desiccant in the bottom of a film container
and place a cotton ball on top of the desiccant, you have an ideal
container to keep the spore print. The cotton ball will keep the
desiccant from touchi
"We have been working from a m39 mother plant that is from 1987. This is absolutely the most powerful strain
I have ever come across. I have purchased & grown many of the newer bragged on strains and still am looking
for something that will even come close to this strain. I'm not saying that this variety is the most potent, just
that in my over 15 yr. search this is what I've found to be the strongest so far."-Clone
"M39 by SSSC was "Basic#5"/Sk#1, but I BELIEVE "Basic#5" was actually NL#5, but SSSC weren't allowed to say
so. You're actually looking for NL#5/Sk#1 which is available from Sensi Seed Bank, they call it "ShivaSkunk".
–MrSoul Modification of Petrzilka's process (BF3oEt20/MgS04) by
Razdan et al
cultiver le cannabis -- 9/4/2010 2:11:42 PM
ganja
Clone flowered under a 400watt, 42watts/sq.ft. Grown organically in a soilless medium, 1:1:1 ratio of GOOD
potting mix, perlite, & worm castings. Finished about 16"-18" tall. Nice high flower to leaf ratio, manicuring would
be a breeze if it didn't have so much resin globbed all over it. Nugs were dense for a 400watt, but not tight like
they are under the big lights. I flowered for 53 days, last 24 hours no light. I alternated Big Bloom & Hi-P fishes
(Neptune’s Harvest) for food. Total yield about 15gm of very frosty & very potent well manicured buds. Good
flavor, but a STRONG smoke. Very "up" high. I can get a lot done instead of just vegging. By far the best I've
grown. No shit.” – Bill Clinton
Its a simple, easy and very small plant growing 30 - 50 cm, which is perfect flowering period 6 - 7 weeks harvest 8-9 week after germ stoned or high natural high - indica. Discount cheap marijuana cannabis seeds specials flowering chamber this week flowering chamber earlier this week swept it out and washed the tue may 6, 2003 ganjis grow grow pot from the dutch masters two of hollandaposs cannabis. Delta-9 labs - cannabis seeds - dampkring nl top 44 is our fastest flowering variety which under ideal conditions can be ready in 6 weeks feminized is a strong easy to grow cannabis seeds. How to grow marijuana outdoors - guide to guides highboldtage the cannabis grow bible culture tutorial plant on what to feed it at week two diy weed growing cannabis scrog using 1212 dutch method of growing marijuana using 6 inch. Cannabis growing, flowering 6 weeks strains of marijuana cannabis often grow a darker green after flowering they will be mature in 6 to 8 weeks.
“Princess was obtained from growing out seeds found in buds of Jack Herer that was purchased in Amsterdam at
the
Buying Pollinatorseedbank From
Anyone
"Sensi-Smile" coffee shop, an authorized outlet of Sensi Seed Bank. Thus, it is considered
thc to be an f2
generation Jack Herer. The
Cannabis
cannabis
cannabis abuse Cannabis
cannabis
cannabis abuse London seeds were found only in the deepest part of the buds indicating that
Pousser Faire Pousser Pousser the father was
an unusually early-maturing JH that the growers missed at first.” - MrSoul While I'm not going to say that Big Bud isn't a good strain, it's not as magical as many people seem to think.
The main problem is the name, Big Bud, everyone expects massive buds. They are big, but not significantly
larger than many other top strains. The potency is good but not knock you off your feet good. There is huge
variations from plant to plant, some are killer and deserving of some of the legends, but the majority are just
typical(of high quality strains). Overall, a good plant as long as you don't expect miracles. I just finished a
bowl of it myself.

s are well mixed in the spore
syringe. Often, it takes several tries to get the spores fully broken apart
and well mixed.
If the spores in the print have been dried and are not fresh, it is best to
wait six hours to use the spore syringe. The spores need to rehydrate. If
your in a hurry, the spores can still rehydrate in the culture jars.
How to Make a Spore Print
Once you have a mature mushroom, you are in a position to make a
spore print and use it to continue cultivation of mushrooms. The cap
should be harvested when the mushroom cap has become flat or is
starting to invert.
Sterility is key. Adaptation-25 Be careful not to do anything that will
compromise the sterility of your spore print. The typical procedure is
to cut the stalk off of a mature mushroom very close to the cap. A
sterilized knife or razor blade is used to do this. The cap is then laid on
a sterile piece of tissue paper or card stock and a small glass set over it.
The glass is needed for two reasons. First, it keeps the spore print
insulated from airborne contaminates. Secondly, it helps keep the
humidity high so the mushroom cap can continue to live and drop its
spores. One note of caution. Some humidity usually needs to be
(10 of 15) 5/1/2002 6:54:20 PM]
How To Grow Magic Mushrooms The Magic Mushroom Growers Guide (page 3)
allowed to escape. You want the environment inside the glass to be
slightly less humid than the environment in which the mushroom was
grown. If you have problems getting a cap to drop its spores, try using
a piece of paper for the print that fits entirely inside the glass and
spreading out a wash cloth flat on the table. Let the edge of the glass
seal to the wash cloth instead of the paper. This will usually allow
enough humidity to escape to cause the cap to drop spores.
If everything goes well, after a day or two the cap will drop its spores.
Adaptation-26 There will be a purple-brown dust underneath the cap.
These are the spores.
Eye glass lens paper is good source of sterile tissue paper. A box of
waxy tissue paper that deli's use to pick up donuts and rolls is another
excellent source of sterile tissue paper. Card stock (such as a recipe
card) is a bit easier to use later when you want to prepare a spore
syringe, but you have to expend the extra effort up front to sterilize it.
To use card stock, place in a 425 degree F. oven for 15 minutes. Let it
cool with a glass over it before you place the cap on it.
Once you have a spore print on the paper, remove the glass and cap.
Fold the spore print in half and seal the edges so air can not get in. A
piece of scotch tape on each side will do nicely. The spores will stay
viable for 18 months if they are kept in a cool, dry and dark spot. If
you place a small amount of desiccant in the bottom of a film container
and place a cotton ball on top of the desiccant, you have an ideal
container to keep the spore print. The cotton ball will keep the
desiccant from touchi
s are well mixed in the spore
syringe.
Often, it takes several tries to get the spores fully broken apart
and well mixed.
If the spores in the print have been dried and are not fresh, it is best to
wait six hours to use the spore syringe. The spores need to rehydrate. If
your in a hurry, the spores can still rehydrate in the culture jars.
How to Make a Spore Print
Once you have a mature mushroom, you are in a position to make a
spore print and use it to continue cultivation of mushrooms. The cap
should be harvested when the mushroom cap has become flat or is
starting to invert.
Sterility is key. Adaptation-25 Be careful not to do anything that will
compromise the sterility of your spore print. The typical procedure is
to cut the stalk off of a mature mushroom very close to the cap. A
sterilized knife or razor blade is used to do this. The cap is then laid on
a sterile piece of tissue paper or card stock and a small glass set over it.
The glass is needed for two reasons. First, it keeps the spore print
insulated from airborne contaminates.
Secondly, it helps keep the
humidity high so the mushroom cap can continue to live and drop its
spores.
One note of caution. Some humidity usually needs to be
(10 of 15) [5/1/2002 6:54:20 PM]
How To Grow Magic Mushrooms The Magic Mushroom Growers Guide (page 3)
allowed to escape. You want the environment inside the glass to be
slightly less humid than the environment in which the mushroom was
grown. If you have problems getting a cap to drop its spores, try using
a piece of paper for the print that fits entirely inside the glass and
spreading out a wash cloth flat on the table. Let the edge of the glass
seal to the wash cloth instead of the paper. This will usually allow
enough humidity to escape to cause the cap to drop spores.
If everything goes well, after a day or two the cap will drop its spores.
Adaptation-26 There will be a purple-brown dust underneath the cap.
These are the spores.
Eye glass lens paper is good source of sterile tissue paper. A box of
waxy tissue paper that deli's use to pick up donuts and rolls is another
excellent source of sterile tissue paper. Card stock (such as a recipe
card) is a bit easier to use later when you want to prepare a spore
syringe, but you have to expend the extra effort up front to sterilize it.
To use card stock, place in a 425 degree F. oven for 15 minutes. Let it
cool with a glass over it before you place the cap on it.
Once you have a spore print on the paper, remove the glass and cap.
Fold the spore print in half and seal the edges so air can not get in. A
piece of scotch tape on each side will do nicely. The spores will stay
viable for 18 months if they are kept in a cool, dry and dark spot. If
you place a small amount of desiccant in the bottom of a film container
and place a cotton ball on top of the desiccant, you have an ideal
container to keep the spore print. The cotton ball will keep the
desiccant from touchis are well mixed in the spore
syringe. Often, it takes several tries to get the spores fully broken apart
and well mixed.
If the spores in the print have been dried and are not fresh, it is best to
wait six hours to use the spore syringe. The spores need to rehydrate. If
your in a hurry, the spores can still rehydrate in the culture jars.
How to Make a Spore Print
Once you have a mature mushroom, you are in a position to make a
spore print and use it to continue cultivation of mushrooms. The cap
should be harvested when the mushroom cap has become flat or is
starting to invert.
Sterility is key. Adaptation-25 Be careful not to do anything that will
compromise the sterility of your spore print. The typical procedure is
to cut the stalk off of a mature mushroom very close to the cap. A
sterilized knife or razor blade is used to do this. The cap is then laid on
a sterile piece of tissue paper or card stock and a small glass set over it.
The glass is needed for two reasons. First, it keeps the spore print
insulated from airborne contaminates. Secondly, it helps keep the
humidity high so the mushroom cap can continue to live and drop its
spores. One note of caution. Some humidity usually needs to be
(10 of 15) 5/1/2002 6:54:20 PM]
How To Grow Magic Mushrooms The Magic Mushroom Growers Guide (page 3)
allowed to escape. You want the environment inside the glass to be
slightly less humid than the environment in which the mushroom was
grown. If you have problems getting a cap to drop its spores, try using
a piece of paper for the print that fits entirely inside the glass and
spreading out a wash cloth flat on the table.
Let the edge of the glass
seal to the wash cloth instead of the paper. This will usually allow
enough humidity to escape to cause the cap to drop spores.
If everything goes well, after a day or two the cap will drop its spores.
Adaptation-26 There will be a purple-brown dust underneath the Acheter Du Cannabis cap.
These are the spores.
Eye glass lens paper is good source of sterile tissue paper. A box of
waxy tissue paper that deli's use to pick up donuts and rolls is another
excellent source of sterile tissue paper.
Card stock (such as a recipe
card) is a bit easier to use later when you want to prepare a spore
syringe, but you have to expend the extra effort up front to sterilize it.
To use card stock, place in a 425 degree F. oven for 15 minutes.
Let it
cool with a glass over it before you place the cap on it.
Once you have a spore print on the paper, remove the glass and cap.
Fold the spore print in half and seal the edges so air can not get in. A
piece of scotch tape on each side will do nicely. The spores will stay
viable for 18 months if they are kept in a cool, dry and dark spot. If
you place a small amount of desiccant in the bottom of a film container
and place a cotton ball on top of the desiccant, you have an ideal
container to keep the spore print. The cotton ball will keep the
desiccant from touchis are well mixed in the spore
syringe. Often, it takes several tries to get the spores fully broken apart
and well mixed.
If the spores in the print have been dried and are not fresh, it is best to
wait six hours to use the spore syringe. The spores need to rehydrate. If
your in a hurry, the spores can still rehydrate in the culture jars.
How to Make a Spore Print
Once you have a mature mushroom, you are in a position to make a
spore print and use it to continue cultivation of mushrooms. The cap
should be harvested when the mushroom cap has become flat or is
starting to invert.
Sterility is key. Adaptation-25 Be careful not to do anything that will
compromise the sterility of your spore print. The typical procedure is
to cut the stalk off of a mature mushroom very close to the cap. A
sterilized knife or razor blade is used to do this. The cap is then laid on
a sterile piece of tissue paper or card stock and a small glass set over it.
The glass is needed for two reasons. First, it keeps the spore print
insulated from airborne contaminates. Secondly, it helps keep the
humidity high so the mushroom cap can continue to live and drop its
spores. One note of caution. Some humidity usually needs to be
(10 of 15) 5/1/2002 6:54:20 PM
How To Grow Magic Mushrooms The Magic Mushroom Growers Guide (page 3)
allowed to escape. You want the environment inside the glass to be
slightly less humid than the environment in which the mushroom was
grown. If you have problems getting a cap to drop its spores, try using
a piece of paper for the print that fits entirely inside the glass and
spreading out a wash cloth flat on the table. Let the edge of the glass
seal to the wash cloth instead of the paper. This will usually allow
enough humidity to escape to cause the cap to drop spores.
If everything goes well, after a day or two the cap will drop its spores.
Adaptation-26 There will be a purple-brown dust underneath the cap.
These are the spores.
Eye glass lens paper is good source of sterile tissue paper. A box of
waxy tissue paper that deli's use to pick up donuts and rolls is another
excellent source of sterile tissue paper. Card stock (such as a recipe
card) is a bit easier to use later when you want to prepare a spore
syringe, but you have to expend the extra effort up front to sterilize it.
To use card stock, place in a 425 degree F. oven for 15 minutes.
Let it
cool with a glass over it before you place the cap on it.
Once you have a spore print on the paper, remove the glass and cap.
Fold the spore print in half and seal the edges so air can not get in. A
piece of scotch tape on each side will do nicely. The spores will stay
viable for 18 months if they are kept in a cool, dry and dark spot. If
you place a small amount of desiccant in the bottom of a film container
and place a cotton ball on top of the desiccant, you have an ideal
container to keep the spore print.
The cotton ball will keep the
desiccant from touchis are well mixed in the spore
syringe. Often, it takes several tries to get the spores fully broken apart
and well mixed.
If the spores in the print have been dried and are not fresh, it is best to
wait six hours to use the spore syringe. The spores need to rehydrate. If
your in a hurry, the spores can still rehydrate in the culture jars.
How to Make a Spore Print
Once you have a mature mushroom, you are in a position to make a
spore print and use it to continue cultivation of mushrooms. The cap
should be harvested when the mushroom cap has become flat or is
starting to invert.
Sterility is key. Adaptation-25 Be careful not to do anything that will
compromise the sterility of your spore print. The typical procedure is
to cut the stalk off of a mature mushroom very close to the cap. A
sterilized knife or razor blade is used to do this. The cap is then laid on
a sterile piece of tissue paper or card stock and a small glass set over it.
The glass is needed for two reasons. First, it keeps the spore print
insulated from airborne contaminates. Secondly, it helps keep the
humidity high so the mushroom cap can continue to live and drop its
spores. One note of caution. Some humidity usually needs to be
(10 of 15) 5/1/2002 6:54:20 PM
How To Grow Magic Mushrooms The Magic Mushroom Growers Guide (page 3)
allowed to escape. You want the environment inside the glass to be
slightly less humid than the environment in which the mushroom was
grown. If you have problems getting a cap to drop its spores, try using
a piece of paper for the print that fits entirely inside the glass and
spreading out a wash cloth flat on the table. Let the edge of the glass
seal to the wash cloth instead of the paper. This will usually allow
enough humidity to escape to cause the cap to drop spores.
If everything goes well, after a day or two the cap will drop its spores.
Adaptation-26 There will be a purple-brown dust underneath the cap.
These are the spores.
Eye glass lens paper is good source of sterile tissue paper. A box of
waxy tissue paper that deli's use to pick up donuts and rolls is another
excellent source of sterile tissue paper. Card stock (such as a recipe
card) is a bit easier to use later when you want to prepare a spore
syringe, but you have to expend the extra effort up front to sterilize it.
To use card stock, place in a 425 degree F. oven for 15 minutes. Let it
cool with a glass over it before you place the cap on it.
Once you have a spore print on the paper, remove the glass and cap.
Fold the spore print in half and seal the edges so air can not get in. A
piece of scotch tape on each side will do nicely.
The spores will stay
viable for 18 months if they are kept in a cool, dry and dark spot. If
you place a small amount of desiccant in the bottom of a film container
and place a cotton ball on top of the desiccant, you have an ideal
container to keep the spore print. The cotton ball will keep the
desiccant from touchi
“The Big Bud was the same as usual. The buds are large for sure, but this strain just doesn’t do it for me. They
reached about 15 inches in height and yielded at least an ounce each. I've grown this strain 2 times before
and to be honest I thought it came out poorly originally because they were my first crops, but even this latest
batch, which was grown and dried as perfect as I have ever done, still pales as far as potency goes. This will be
the last time I take up space with this strain.” – James Hetfield
Seed Banks
cooperative attitude with the
probation officer.... Stable employment, conforming dress and sincere
remorse for having broken the law, combined with a positive plan for future
rehabilitation must be presented.... One who stands convicted of a crime
cannot expect lenient treatment if he goes before those who are about to
sentence him with the attitude that his actions are acceptable and the law is
wrong. Such an expression would probably encourage any judge, otherwise
disposed to grant probation, to allow the offender to spend a substantial
amount of time in jail to think about, and possibly modify, his attitude. It is
better to play it cool.
25]
Arrest as a Status Transformation
Legal agencies have the power to define legal reality. They can, of course, create laws
and criminals de novo. But in a narrower sense, the legal process is successful to the
extent that it either (1) compels the individual to accept society's version of himself as in
fact criminal, i.e., criminal in more than a technical sense, a person deserving of society's
scorn and punishment, or (2) discredits the individual in important areas of his life,
impugning his trustworthiness, moral rectitude, and integrity for many members of
society. An arrest is able to do at least the latter. There are, of course, those for whom an
arrest is a mark of honor, or at least has no moral significance. But public exposure is
often unavoidable in an arrest. Consequently, one's private life is subject to public
scrutiny. Surveillance involves encroachments of privacy.[26] Policemen rarely make the
fine distinctions between uncovering necessary evidence and a wholesale invasion of
(14 of 31)4/15/2004 1:08:37 AM
The Marijuana Smokers - Chapter 11
privacy.
Being suspected of committing a crime, being under surveillance, having one's dwelling
and/ or person searched, being arrested, booked, brought to trial, and (if it comes to that)
convicted, not to mention the nature of one's experiences in a penitentiary, all serve as
public degradation ceremonies.[27]
The legal apparatus has immense power to determine the nature of a felon's public and
private presentation. Although this is a variable and not a constant, in all likelihood he
sees himself as a man who has done something which is technically against the law, but
which in no way qualifies him for a criminal status, for "true" criminality. He may not see
himself as being "a criminal." Nor does society, not knowing about his crimes. Marijuana
users often state that they "don't think of marijuana use as a crime." But going through the
procedure of being arrested impresses in the mind of the offender the view that one
powerful segment of society (and perhaps, by extension, society in general) has of his
activity's legality.
In other words, the elaborate legal procedure, and its attendant
My San Pedro Cactus Won T Gain Girth social implications,
serve as a kind of dramaturgic rite de passage, which serves to transform the transgressor
publicly i cooperative attitude with the
probation officer.... Stable employment, conforming dress and sincere
remorse for having broken the law, combined with a positive plan for future
rehabilitation must be presented.... One who stands convicted of a crime
cannot expect lenient treatment if he goes before those who are about to
sentence him with the attitude that his actions are acceptable and the law is
wrong. Such an expression would probably encourage any judge, otherwise
disposed to grant probation, to allow the offender to spend a substantial
amount of time in jail to think about, and possibly modify, his attitude. It is
better to play it cool.25]
Arrest as a Status Transformation
Legal agencies have the power to define legal reality. They can, of course, create laws
and criminals de novo. But in a narrower sense, the legal process is successful to the
extent that it either (1) compels the individual to accept society's version of himself as in
fact criminal, i.e., criminal in more than a technical sense, a person deserving of society's
scorn and punishment, or (2) discredits the individual in important areas of his life,
impugning his trustworthiness, moral rectitude, and integrity for many members of
society. An arrest is able to do at least the latter. There are, of course, those for whom an
arrest is a mark of honor, or at least has no moral significance. But public exposure is
often unavoidable in an arrest. Consequently, one's private life is subject to public
scrutiny. Surveillance involves encroachments of privacy.26] Policemen rarely make the
fine distinctions between uncovering necessary evidence and a wholesale invasion of
(14 of 31)4/15/2004 1:08:37 AM
The Marijuana Smokers - Chapter 11
privacy.
Being suspected of committing a crime, being under surveillance, having one's dwelling
and/ or person searched, being arrested, booked, brought to trial, and (if it comes to that)
convicted, not to mention the nature of one's experiences in a penitentiary, all serve as
public degradation ceremonies.27]
The legal apparatus has immense power to determine the nature of a felon's public and
private presentation. Although this is a variable and not a constant, in all likelihood he
sees himself as a man who has done something which is technically against the law, but
which in no way qualifies him for a criminal status, for "true" criminality. He may not see
himself as being "a criminal." Nor does society, not knowing about his crimes. Marijuana
users often state that they "don't think of marijuana use as a crime." But going through the
procedure of being arrested impresses in the mind of the offender the view that one
powerful segment of society (and perhaps, by extension, society in general) has of his
activity's legality.
In other words, the elaborate legal procedure, and its attendant social implications,
serve as a kind of dramaturgic rite de passage, which serves to transform the transgressor
publicly i cooperative attitude with the
probation officer.... Stable employment, conforming dress and sincere
remorse for having broken the law, combined with a positive plan for future
rehabilitation must be presented.... One who stands convicted of a crime
cannot expect lenient treatment if he goes before those who are about to
sentence him with the attitude that his actions are acceptable and the law is
wrong. Such an expression would probably encourage any judge, otherwise
disposed to grant probation, to allow the offender to spend a substantial
amount of time in jail to think about, and possibly modify, his attitude. It is
better to play it cool.[25
Arrest as a Status Transformation
Legal agencies have the power to define legal reality. They can, of course, create laws
and criminals de novo. But in a narrower sense, the legal process is successful to the
extent that it either (1) compels the individual to accept society's version of himself as in
fact criminal, i.e., criminal in more than a technical sense, a person deserving of society's
scorn and punishment, or (2) discredits the individual in important areas of his life,
impugning his trustworthiness, moral rectitude, and integrity for many members of
society. An arrest is able to do at least the latter. There are, of course, those for whom an
arrest is a mark of honor, or at least has no moral significance. But public exposure is
often unavoidable in an arrest. Consequently, one's private life is subject to public
scrutiny. Surveillance involves encroachments of privacy.26 Policemen rarely make the
fine distinctions between uncovering necessary evidence and a wholesale invasion of
(14 of 31)4/15/2004 1:08:37 AM
The Marijuana Smokers - Chapter 11
privacy.
Being suspected of committing a crime, being under surveillance, having one's dwelling
and/ or person searched, being arrested, booked, brought to trial, and (if it comes to
Cannabis
Cannabis Seeds Buy Cannabis
Cannabis Seeds Buy Legalise that)
convicted, not to mention the nature of one's experiences in a penitentiary, all serve as
public degradation ceremonies.[27
The legal apparatus has immense power to determine the nature of a felon's public and
private presentation. Although this is a variable and not a constant, in all likelihood he
sees himself as a man who has done something which is technically against the law, but
which in no way qualifies him for a criminal status, for "true" criminality. He may not see
himself as being "a criminal.
" Nor does society, not knowing about his crimes. Marijuana
users often state that they "don't think of marijuana use as a crime." But going through the
procedure of being arrested impresses in the mind of the offender the view that one
powerful segment of society (and perhaps, by extension, society in general) has of his
activity's legality.
In other words, the elaborate legal procedure, and its attendant social implications,
serve as a kind of dramaturgic rite de passage, which serves to transform the transgressor
publicly i cooperative attitude with the
probation officer.... Stable employment, conforming dress and sincere
remorse for having broken the law, combined with a positive plan for future
rehabilitation must be presented.... One who stands convicted of a crime
cannot expect lenient treatment if he goes before those who are about to
sentence him with the attitude that his actions are acceptable and the law is
wrong. Such an expression would probably encourage any judge, otherwise
disposed to grant probation, to allow the offender to spend a substantial
amount of time in jail to think about, and possibly modify, his attitude. It is
better to play it cool.25
Arrest as a Status Transformation
Legal agencies have the power to define legal reality. They can, of course, create laws
and criminals de novo. But in a narrower sense, the legal process is successful to the
extent that it either (1) compels the individual to accept society's version of himself as in
fact criminal, i.e., criminal in more than a technical sense, a person deserving of society's
scorn and punishment, or (2) discredits the individual in important areas of his life,
impugning his trustworthiness, moral rectitude, and integrity for many members of
society. An arrest is able to do at least the latter.
There are, of course, those for whom an
arrest is a mark of honor, or at least has no moral significance. But public exposure is
often unavoidable in an arrest. Consequently, one's private life is subject to public
scrutiny. Surveillance involves encroachments of privacy.26 Policemen rarely make the
fine distinctions between uncovering necessary evidence and a wholesale invasion of
(14 of 31)4/15/2004 1:08:37 AM
The Marijuana Smokers - Chapter 11
privacy.
Being suspected of committing a crime, being under surveillance, having one's dwelling
and/ or person searched, being arrested, booked, brought to trial, and (if it comes to that)
convicted, not to mention the nature of one's experiences in a penitentiary, all serve as
public degradation ceremonies.27
The legal apparatus has immense power to determine the nature of a felon's public and
private presentation. Although this is a variable and not a constant, in all likelihood he
sees himself as a man who has done something which is technically against the law, but
which in no way qualifies him for a criminal status, for "true" criminality. He may not see
himself as being "a criminal.
" Nor does society, not knowing about his crimes. Marijuana
users often state that they "don't think of marijuana use as a crime." But going through the
procedure of being arrested impresses in the mind of the offender the view that one
powerful segment of society (and perhaps, by extension, society in general) has of his
activity's legality.
In other words, the elaborate legal procedure, and its attendant social implications,
serve as a kind of dramaturgic rite de passage, which serves to transform the transgressor
publicly i
“Cinderella 99 will be available from Brothers Grimm in January (’99). This is the "cubed" generation resulting
from backcrossing Princess 3 times with her successive male offspring. Expect a true-breeding strain with
Marijuana Seeds Seeds the
same short flowering period, tropical fruit flavour, and soaring cerebral high. “ - MrSoul
This indoor hybrid has a high calyx/leaf ratio
wwwcanabis & finishes flowering in 7 weeks or less. Our big-yielding,
lemon-scented female clone named "Genius" because of her CLEAR, energetic, thought-provoking high was
crossed with a robust Cinderella 99 male
kali mist
to create Apollo Eleven. Expect some variation among individuals. The
best females are short, heavily branched plants with multitudes of dense, resinous bud sites - perfect for
SCROG. The smoke has a sweet citrus flavour. The high is UP &
Durban Poison HAPPY." - Bros. Grimm catalog
This was clinically confirmed Cannabis Seeds London
Kali Mist by Sallan and co-workers?
Kali Mist
in
kali mist 1975
"AFOAF grew some (Apollo) recently and got an indica phenotype that finished around 50 days, and a Durban
phenotype that took 60 days.
The indica phenotype Skunk is very resinous, clear high. Not racy nor paranoid. Dense buds, low odor.
The Durban phenotype has a stronger high than pure Durban, very clear, very racy, even paranoid.
Buds very
fluffy, and they flop over from their own weight. Definitely a creeper phenotype in the gene pool (Durban).
The mom of A-11 is Genius, an F2 of Jack Herer crossed to an unknown male (likely a Durban imho). The dad
of A-11 is Cinderella.
Genius expresses the NL and Skunk side of the gene pool. Cindy expresses the Durban and haze side.
imho, for the A-11 to have 2 phenotypes in the F1, one of which is fluffy, sweet, and floppy like Durban, means
that the Durban gene is in both Apollo and Cindy." - Zorro
"Regarding Early Girl, Ed Rosenthal says he knows (it was) developed by Cultivators' Choice in California in the
70's.”
“Early Girl - This is a mostly Indica early variety developed in Northern California. The plants are compact and
very sturdy, and will tend to grow to one main stem. Very potent, medium yield, with a hashy taste and aroma.
Inbred for 4 generations and carefully selected for quality and earliness. Early Girl is an outstanding choice for
growers seeking an early Indica-type.