yumbolt
effects of cannabis
“A FOAF grew Early Pearl for a couple of years. it's nice and versatile. a foaf grew some in and out. indoors COLLEGE CANNABIS in
rockwool under a 400w it yields a/ just <1 oz. at 3 ft. by topping them. outdoors its close to 1 lb. at 6 ft. finish
around the end of September out, 8 weeks in. A foaf think the plant is a mix of sativa/indica.
it has longer
node spacing than you may like indoors like a sativa, but it grows fat wide fans like an indica. the high is Cannabis Pipes kind
of mixed too, a little spacey, followed by complete body freeze. its nice...” - cuz
I grew EP last year for the first time. I didn’t get them to maturity, because of three or four major fukups by
me, along with a VERY wet autumn, so my yield was almost nil. I planted out on June-1, they suffered a couple
of frosts during which some purple showed. I planted them out after sexing on 12/12, which I wouldn't do now,
because once these plants start to flower, they don’t like re-vegging, so a confused bunch of semi-flowering
plants was the result. Water soluble slug pellets resulted in the plants being eaten to one foot tall bare stems
soon after. I reverted to my other type of (non-soluble) slug-pellet and the damage stopped. One plant
re-grew in veg form, the others continued in semi-flower. Something odd happened then- which you should
take note of- I had 18" to 2' chicken wire fences around each plant, but somehow some bastard rabbits ate the
newly growing plants (this was early July)- rabbits that could CLIMB FENCES!. “Northern lights #2 = originally a Hindu Kush X Thai cross. It was selectively inbred and developed into a stable
almost all Kush type cross that is mostly indica.”
“I haven't done #5, but # 2 (Oasis) was great. Most people say that the NL strains have little or no taste or
smell, but my experience with #2 was that it had an oniony, garlicky smell and taste. The buzz was it.
Couch-lock, but surprisingly psychoactive, given indica's reputation. I don't think you can go wrong with a strain
that highly touted.” - Skunkman They're funny plants when it comes to cuttings. They seem to be much slower to take than most, but the huge
amount of vigor that is inherent in the breed means that the cuts don’t die- they just hang around and don't
do much. I took cuttings of my over-wintering mother which took about 3 weeks to take- during this time, the
cuts didn’t look ill, and didn’t grow, they just 'existed'. The mother plant doesn’t do well indoors- mine seemed
to get freaked out and started to flower. It flowered though most of winter, then suddenly decided to revert, I
don’t know why. Green Spirit is a hybrid of Big Bud and Skunk #1. Was developed because Big Bud itself is not a very
consistent strain, with very big differences among individual plants. By crossing Big Bud and Skunk #1, Green
Spirit became quite homogeneous. Good results under artificial lights. Clear and strong high. The plants have
an explosive flowering trait and are extremely resinous. Very high yield. “Princess was obtained from growing out seeds found in buds of Jack Herer that was purchased in Amsterdam at
the "Sensi-Smile" coffee shop, an authorized outlet of Sensi Seed Bank. Thus, it is considered to be an f2
generation Jack Herer. The seeds were found only in the deepest part of the buds indicating that the father was
an unusually early-maturing JH that the growers missed at first.” - MrSoul
“After years of heartfelt requests for a Northern Lights strain, Sagarmatha has engineered a superior version of
the NL legend. NL#9 delivers the finest qualities expected from that variety: a short plant with a voracious
stone and minimal smell.
The flowering time
Cannabis Partido Cannabis Partido is acceptable and fat chunky nugs can be expected.
feminized cannabis seeds Fantastic for
gardens where smell is an unfavorable factor. Also fine for persons who desire a heavy, lethargic stone.“After years of heartfelt requests for a Northern Lights strain, Sagarmatha has engineered a superior version of
the NL legend.
northern light NL9 delivers the finest qualities expected from that variety: a short plant with a voracious
stone and minimal
barney's breakfast bar
smell. The flowering time is acceptable and fat chunky nugs can be expected. Fantastic for
gardens where smell is an unfavorable factor. Also fine for persons
barney's breakfast bar who desire a heavy, lethargic stone.
“Developed in Seattle, perfected in Holland, Northern Lights has become the “State of the Art” indoor plant. A
must!
“Northern Lights #1 = Described as a true breeding strain (Stable) of Afghani origins.
Northern Lights #135A = Available commercially for just a short while (87-88) from the original Seed Bank.
Described as "a fast finishing hybrid of Northern lights and an Afghani". This sounds a lot like the forerunner of
Slyder/Chronic.”“Developed in Seattle, perfected in Holland, Northern Lights has become the “State of the Art” indoor plant. A
must!
“Northern Lights 1 = Described as a true breeding strain (Stable) of Afghani origins.
Northern Lights 135A = Available commercially for just a short while (87-88) from the original Seed Bank.
Described as "a fast Achat Cannabis Test Cannabis finishing hybrid of Northern lights and an Afghani". This sounds a lot like the forerunner of
Slyder/Chronic.”
ime for any other
questions. If and only if we remember two methodological qualifications will our analysis
of the responses be meaningful:
1. The form of the study instrument—open-ended or forced choice—gives us results
that are superficially different (the magnitude of the responses, for instance), but
fundamentally the same (the order of the responses).
2. Individuals who do not mention a given effect on our open-ended question are not
thereby automatically agreeing that marijuana does not have that effect on
them—they just did not think of it at that moment in that situation ( although we do
have a certain amount of confidence that those who did not mention the effect were
(10 of 34)4/15/2004 1:07:27 AM
The Marijuana Smokers - Chapter 7
less likely to experience it than those who did mention it).
Overviewing the responses elicited, we see that there are over 200 totally distinct
effects described. (We have presented only those which ten or more subjects mentioned;
there are almost 150 effects each of which was mentioned by fewer than ten respondents.)
Sixty-four of these were proffered by single individuals, completely idiosyncratic
responses that could not in any way be classified with other responses which were
somewhat similar. For instance, one individual said that she had the feeling of "being
sucked into a vortex." Another reported more regular bowel movements while intoxicated.
A third said that she could feel her brains dripping out of her ears. In addition to the sixtyfour
unique and therefore totally unclassifiable responses, there were twenty-eight where
only two respondents agreed that marijuana had that effect on them. However valid these
responses might be to the individual himself, they are not useable to us, since they are still
quite idiosyncratic.
Although the diversity of the responses was in itself an interesting finding, the picture
was not totally chaotic. Each individual offered an average of roughly ten different effects
of the drug as a description of the high. Some of these effects were offered independently
by a large percentage of the interviewees although, curiously, none attracted a majority;
every effect described was given by a minority of the sample. That is, in spite of the huge
diversity in the responses, some agreement prevailed.
Marijuana users seem to describe the effects of the drug
Canibus in overwhelmingly favorable
terms. Certainly the vast majority of the effects mentioned would be thought positive if
the judge did not
Bluehaze know that marijuana touched off the state in question. Let us suppose
that we have been told that the list characterizes how some people react to a warm spring
day; our sense would be that they think well of its effects. Thus, most of the
characteristics of the marijuana high, as described by its users, would be looked at as
beneficial. Yet with the knowledge that the triggering agent was marijuana, the judge
reinterprets his favorable opinion and decides They're funny plants when it comes to cuttings. They seem to be much slower to take than most, but the huge
amount of vigor that is inherent in the breed means that the cuts don’t die- they just hang around and don't
do much. I took cuttings of my over-wintering mother which took about 3 weeks to take- during this time, the
cuts didn’t look ill, and didn’t grow, they just 'existed'. The mother plant doesn’t do well indoors- mine seemed
to get freaked out and started to flower. It flowered though most of winter, then suddenly decided to revert, I
don’t know why.
They're funny plants when it comes to cuttings. They seem to be much slower to take than Seedsofpassion most, but the huge
amount of vigor that is inherent homegrown fantasy in the breed means that the Buy Marijuana Seeds Online Ruderalis cuts don’t die- they just hang homegrown fantasy
homegrown fantasy
around and don't
do much. I took cuttings of my over-wintering mother which took about 3 weeks to take- during this time, the
cuts didn’t look ill, and didn’t grow, they just 'existed'.
The mother plant doesn’t do well indoors- mine seemed
to get freaked out and started to flower. It flowered though
nirvana most of winter, then suddenly decided to revert, I
don’t know why. “Cinderella 99 will be available from Brothers Grimm in January (’99). This is the "cubed" generation resulting
from backcrossing Princess 3 times with her successive male offspring. Expect a true-breeding strain with the
same short flowering period, tropical fruit flavour, and soaring cerebral high. “ - MrSoul I grew this last year outdoors. about 5' tall at harvest, lots of short side branches with plenty of buds. yield
was about 4 oz. of average quality weed. excellent hashy taste which peaked at about 1 month of curing and
then started to decline. high was average and didn't last very long. maybe due to accidental pollination.
susceptible to bud mold in high humidity.” dr.atomic Green Spirit is a short resiny 8 week strain that crystals up nicely and has a real bomb taste. The only
drawback I see is the mold susceptibility trait inherited from its Skunk#1 forefathers.-Mcgee
s are well mixed in the spore
syringe. Often, it takes several tries to get the spores fully broken apart
and well mixed.
If the spores in the print have been dried and are not fresh, it is best to
wait six hours to use the spore syringe.
The spores need to rehydrate. If
your in a hurry, the spores can still rehydrate in the culture jars.
How to Make a Spore Print
Once you have a mature mushroom, you are in a position to make a
spore print and use it to continue cultivation of mushrooms. The cap
should be harvested when the mushroom cap has become flat or is
starting to invert.
Sterility is key. Adaptation-25 Be careful not to do anything that will
compromise the sterility of your spore print. The typical procedure is
to cut the stalk off of a mature mushroom very close to the cap. A
sterilized knife or razor blade is used to do this. The cap is then laid on
a sterile piece of tissue paper or card stock and a small glass set over it.
The glass is needed for two reasons. First, it keeps the spore print
insulated from airborne contaminates. Secondly, it helps keep the
humidity high so the mushroom cap can continue to live and drop its
spores.
One note of caution. Some humidity usually needs to be
(10 of 15) [5/1/2002 6:54:20 PM]
How To Grow Magic Mushrooms The Magic Mushroom Growers Guide (page 3)
allowed to escape.
You want the environment inside the glass to be
slightly less humid than the environment in which the mushroom was
grown. If you have problems getting a cap to drop its spores, try using
a piece of paper for the print that fits entirely inside the glass and
spreading out a wash cloth
g13
flat on the table. Let the edge of the glass
seal to the wash cloth instead of the paper. This will usually allow
enough humidity to escape to cause the cap to drop spores.
If everything goes well, after a day or two the cap will drop its spores.
Adaptation-26 There will be a purple-brown dust underneath the cap.
These are the spores.
Eye glass lens paper is good source of sterile tissue paper. A box of
waxy tissue paper that deli's use to pick up donuts and rolls is another
excellent source of sterile tissue paper. Card stock (such as a recipe
card) is a bit easier to use later when you want to prepare a spore
syringe, but you have to expend the extra effort up front to sterilize it.
To use card stock, place in a 425 degree F. oven for 15 minutes. Let it
cool with a glass over it before you place the cap on it.
Once you have a spore print on the paper, remove the glass and cap.
Fold the spore print in half and seal the edges so air can not get in. A
piece of scotch tape on each side will do nicely. The spores will stay
viable for 18 months if they are kept in a cool, dry and dark spot. If
you place a small amount of desiccant in the bottom of a film container
and place a cotton ball on top of the desiccant, you have an ideal
container to keep the spore print. The cotton ball will keep the
desiccant from touchis are well mixed in the spore
syringe. Often, it takes several tries to get the spores fully broken apart
and well mixed.
If the spores in the print have been dried and are not fresh, it is best to
wait six hours to use the spore syringe. The spores need to rehydrate. If
your in a hurry, the spores can still rehydrate in the culture jars.
How to Make a Spore Print
Once you have a mature mushroom, you are in a position to make a
spore print and use it to continue cultivation of mushrooms. The cap
should be harvested when the mushroom cap has become flat or is
starting to invert.
Sterility is key. Adaptation-25 Be careful not to do anything that will
compromise the sterility of your spore print. The typical procedure is
to cut the stalk off of a mature mushroom very close to the cap. A
sterilized knife or razor blade is used to do this. The cap is then laid on
a sterile piece of tissue paper or card stock and a small glass set over it.
The glass is needed for two reasons. First, it keeps the spore print
insulated from airborne contaminates. Secondly, it helps keep the
humidity high so the mushroom cap can continue to live and drop its
spores. One note of caution. Some humidity usually needs to be
(10 of 15) 5/1/2002 6:54:20 PM]
How To Grow Magic Mushrooms The Magic Mushroom Growers Guide (page 3)
allowed to escape. You want the environment inside the glass to be
slightly less humid than the environment in which the mushroom was
grown. If you have problems getting a cap to drop its spores, try using
a piece of paper for the print that fits entirely inside the glass and
spreading out a wash cloth flat on the table. Let the edge of the glass
seal to the wash cloth instead of the paper. This will usually allow
enough humidity to escape to cause the cap to drop spores.
If everything goes well, after a day or two the cap will drop its spores.
Adaptation-26 There will be a purple-brown dust underneath the cap.
These are the spores.
Eye glass lens paper is good source of sterile tissue paper. A box of
waxy tissue paper that deli's use to pick up donuts and rolls is another
excellent source of sterile tissue paper. Card stock (such as a recipe
card) is a bit easier to use later when you want to prepare a spore
syringe, but you have to expend the extra effort up front to sterilize it.
To use card stock, place in a 425 degree F. oven for 15 minutes. Let it
cool with a glass over it before you place the cap on it.
Once you have a spore print on the paper, remove the glass and cap.
Fold the spore print in half and seal the edges so air can not get in. A
piece of scotch tape on each side will do nicely. The spores will stay
viable for 18 months if they are kept in a cool, dry and dark spot. If
you place a small amount of desiccant in the bottom of a film container
and place a cotton ball on top of the desiccant, you have an ideal
container to keep the spore print.
The cotton ball will keep the
desiccant from touchis are well mixed in the spore
syringe. Often, it takes several tries to get the spores fully broken apart
and well mixed.
If the spores in the print have been dried and are not fresh, it is best to
wait six hours to use the spore syringe. The spores need to rehydrate. If
your in a hurry, the spores can still rehydrate in the culture jars.
How to Make a Spore Print
Once you have a mature mushroom, you are in a position to make a
spore print and use it to continue cultivation of mushrooms. The cap
should be harvested when the mushroom cap has become flat or is
starting to invert.
Sterility is key. Adaptation-25 Be careful not to do anything that will
compromise the sterility of your spore print. The typical procedure is
to cut the stalk off of a mature mushroom very close to the cap. A
sterilized knife or razor blade is used to do this. The cap is then laid on
a sterile piece of tissue paper or card stock and a small glass set over it.
The glass is needed for two reasons.
First, it keeps the spore print
insulated from airborne contaminates. Secondly, it helps keep the
humidity high so the mushroom cap can continue to live and drop its
spores. One note of caution. Some humidity usually needs to be
(10 of 15) [5/1/2002 6:54:20 PM
How To Grow Magic Mushrooms The Magic Mushroom Growers Guide (page 3)
allowed to escape. You want the environment inside the glass to be
slightly less humid than the environment in which the mushroom was
grown.
If you have problems getting a cap to drop its spores, try using
a piece of paper for the print that fits entirely inside the glass and
spreading out a wash cloth flat on the table. Let the edge of the glass
seal to the wash cloth instead of the paper.
This will usually allow
enough humidity to escape to cause the cap to drop spores.
If everything goes well, after
Greenmans
a day or two the cap will drop its spores.
Adaptation-26 There will be a purple-brown dust underneath the cap.
These are the spores.
Eye glass lens paper is good source of sterile tissue paper. A box of
waxy tissue paper that deli's use to pick up donuts and rolls is another
excellent source of sterile tissue paper.
Card stock (such as a recipe
card) is a bit easier to use later when you want to prepare a spore
syringe, but you have to expend the extra effort up front to sterilize it.
To use card stock, place in a 425 degree F. oven for 15 minutes. Let it
cool with a glass over it before you place the cap on it.
Once you have a spore print on the paper, remove the glass and cap.
Fold the spore print in half and seal the edges so air can not get in. A
piece of scotch tape on each side will do nicely. The spores will stay
viable for 18 months if they are kept in a cool, dry and dark spot. If
you place a small amount of desiccant in the bottom of a film container
and place a cotton ball on top of the desiccant, you have an ideal
container to keep the spore print.
The cotton ball will keep the
desiccant from touchis are well mixed in the spore
syringe. Often, it takes several tries to get the spores fully broken apart
and well mixed.
If the spores in the print have been dried and are not fresh, it is best to
wait six hours to use the spore syringe. The spores need to rehydrate. If
your in a hurry, the spores can still rehydrate in the culture jars.
How to Make a Spore Print
Once you have a mature mushroom, you are in a position to make a
spore print and use it to continue cultivation of mushrooms. The cap
should be harvested when the mushroom cap has become flat or is
starting to invert.
Sterility is key. Adaptation-25 Be careful not to do anything that will
compromise the sterility of your spore print. The typical procedure is
to cut the stalk off of a mature mushroom very close to the cap. A
sterilized knife or razor blade is used to do this. The cap is then laid on
a sterile piece of tissue paper or card stock and a small glass set over it.
The glass is needed for two reasons. First, it keeps the spore print
insulated from airborne contaminates.
Secondly, it helps keep the
humidity high so the mushroom cap can continue to live and drop its
spores. One note of caution.
Some humidity usually needs to be
(10 of 15) 5/1/2002 6:54:20 PM
How To Grow Magic Mushrooms The Magic Mushroom Growers Guide (page 3)
allowed to escape. You want the environment inside the glass to be
slightly less humid than the environment in which the mushroom was
grown. If you have problems getting a cap to drop its spores, try using
a piece of paper for the print that fits entirely inside the glass and
spreading out a wash cloth flat on the table. Let the edge of the glass
seal to the wash cloth instead of the paper. This will usually allow
enough humidity to escape to cause the cap to drop Greenmans spores.
If everything goes well, after a day or two the cap will drop its spores.
Adaptation-26 There will be a purple-brown dust underneath the cap.
These are the spores.
Eye glass lens paper is good source of sterile tissue paper. A box of
waxy tissue paper that deli's use to pick up donuts and rolls is another
excellent source of sterile tissue paper. Card stock (such as a recipe
card) is a bit easier to use later when you want to prepare a spore
syringe, but you have to expend the extra effort up front to sterilize it.
To use card stock, place in a 425 degree F. oven for 15 minutes.
Let it
cool with a glass over it before you place the cap
Fond D Ecran Cannabis on it.
Once you have a spore print on the paper, remove the glass and cap.
Fold the spore print in half and seal the edges so air can not get in. A
piece of scotch tape on each side will do nicely. The spores will stay
viable for 18 months if they are kept in a cool, dry and dark spot. If
you place a small amount of desiccant in the bottom of a film container
and place a cotton ball on top of the desiccant, you have an ideal
container to keep the spore print. The cotton ball will keep the
desiccant from touchi
Medicinal Cannabis Partido Cannabis align="right"> They're funny plants when it comes to cuttings.
They seem to be much slower to take than most, but the huge
amount of vigor that is inherent in the breed means that the cuts don’t die- they just hang around and don't
do much. I took cuttings of my over-wintering mother which took about 3 weeks to take- during this time, the
cuts didn’t look ill, and didn’t grow, they just 'existed'.
The mother plant doesn’t do well indoors- mine seemed
to get freaked out and started to flower. It flowered though most of winter, then suddenly decided to revert, I
don’t know why.
“This strain may be the "Holy Grail". The result of painstakingly backcrossing a VERY RARE female to her male
progeny over 3 generations. This hybrid was specifically bred for indoor cultivation. Short statured & heavily
branched, this plant grows LONG, dense colas with Fotos De Cannabis Cannabis Information an EXTREMELY high flower/leaf ratio and OUTRAGEOUS resin
production. The breeder has observed a "giant leap" in potency with each progressive generation and, as
expected, Cinderella 99 has topped all previous results - her high is heavily influenced by Haze; clear, energetic
& devastatingly psychoactive. A plant with all of the above is rare enough, but Cinderella 99 finishes flowering
after a scant 50 days of 12/12! Above-average yields of crystal covered buds reeking of tropical fruit aromas can
be harvested every other month once a mother plant is selected and asexually propagated. One highlife final accolade -
preliminary results from the breeder indicate Cinderella 99 will breed true..." -Brothers Grimm seedbank
“A FOAF grew Early Pearl for a couple of years.
it's nice and versatile. a foaf grew some in and out. indoors in
rockwool under a 400w it yields a/ just Cannabis Hydroponic <1 oz. at 3 ft. by topping them. outdoors its close to 1 lb. at 6 ft. finish
around the SEEDBANK POLLINATOR end of September out, 8 weeks in. A foaf think the plant is a mix of sativa/indica.
it has longer
node spacing than you may like indoors like a sativa, but it grows fat wide fans like an indica. the high is kind
of mixed too, a little spacey, followed by complete body freeze. its nice...” - cuz
"Regarding Early Girl, Ed Rosenthal says he knows (it was) developed by Cultivators' Choice in California in the
70's.”
“Early Girl - This is a mostly Indica early variety developed in Northern California. The plants are compact and
very sturdy, and will tend to grow to one main stem. Very potent, medium yield, with a hashy taste and aroma.
Inbred for 4 generations and carefully selected for quality and earliness. Early Girl is an outstanding choice for
growers seeking an early Indica-type. The plants build up alkaloids during dry seasons
and draw upon them for growth when the rains come. If the plants are harvested
during or after a wet spell, the alkaloid content may have dropped below 50
percent. If you have a soil test kit, you can get a good indication of the potency of
cacti growing wild. If the soil is rich in nitrogen, the plants are likely to be rich in
alkaloids.
When harvesting peyote, many people uproot the entire plant. This is
unnecessary and wasteful. The roots contain no mescaline. Some of these plants
have taken a long time to reach their size. A cactus three inches in diameter may
be more than 20 years old. To collect peyote properly the button should be
cleanly decapitated slightly above ground level. When the roots are left intact
new buds will form where the old was removed. These will eventually develop
into full-size buttons which may be harvested as before. Faulty harvesting
method have seriously depleted populations of this cactus. Because of the
presence of several phenolic alkaloids peyote cacti do not spoil easily and may
be kept in their fresh form for several weeks after harvesting. If they are to be
kept longer than this they must be refrigerated, frozen, or dried. The enzymes
which cause the harvested plant to eventually decompose also destroy the
mescaline and other alkaloids. To dry peyote buttons lay them out in the hot sun
or in an oven at 250 degrees F until completely devoid of moisture.
OTHER PEYOTE-TYPE CACTI OF CENTRAL MEXICO
There are several cacti which are used by the Tarahumares and other tribes of
central Mexico as substitutes for peyote. Many of these cacti are now under
investigation for their alkaloidal content and sychopharmacological activity.
Progress is somewhat retarded in the studies of the effects of these plants
because almost all experimentation has been conducted on laboratory animals
rather than humans. Some of these cacti have been found to contain mescaline
and other related alkaloids with known sympathomimetic properties. Much further
research is needed on these plants and their activity. However, we will attempt to
bring the reader up to date on what is known about them at this time.
PEYOTILLO:
This small cactus is botanically called PELECYPHORA ASELLIFORMIS. It is
also known sometimes as the hatchet cactus because of its oddly flattened
tubercules. It is often found growing in the state of San Louis Potosi in central
Mexico. The plant contains traces of mescaline too minute to have any effect. It
also contains small amounts of anhalidine, anhaladine, hordenine, Nmethylmescaline,
pellotine, 3-demethyltrichocereine, B-phenethylamine, Nmethyl-
B-phenethylamine, 3,4-dimethoxy-B-pheneththyl-amine, N-methyl-3,4-
dimethoxy-B-phenethylamine, and 4-methoxy-B-phenethy- lamine. Most of these
are found in peyote but in much larger quantities.
TSUWIRI:
The botanical name of this cactus is ARIOCARPUS RETUSUS. The Huichol
name tsuwiri means F
This hybrid is the pinnacle of achievement in Cannabis breeding today. The result: an extremely potent plant
with Cannabisseeds a great Sativa high. In the 1994 harvest festival this variety was miles ahead of its competitors. The high
yields compensate for the slightly longer flowering period. Hybrid vigour provides for lush growth, heavy bud
formation and abundant resin. A true champion!
cannabis -- 3/11/2010 3:37:32 PM
seeddirect
The only side effect reported by the subjects taking 5-HTP was stomachache, of which there were 41 instances during the entire three-year trial. In the placebo group, there were only 10 instances of stomachache, but also 118 instances of nausea and 78 of abdominal pain. This is not inconsistent with the very few side effects other studies have reported by those taking 5-HTP. These results may be explained by 5-HTP's ability to reduce hypersensitivity to pain. Moreover, in the study, eosinophilia (elevation of the special white blood cells associated with inflammation) was not reported in the 5-HTP group; in the control group, there was one case.
This was clinically Growing Marijuana Marijuana Seeds Paypal confirmed by Sallan and co-workers? in Graine 1975
Afoaf has a Posi Big Bud Mom that is 70% pistils ripe, with cloudy heads in about 43-45 days and it yields real
nice. Its a real tough strain, eats ferts big time, not the strongest most devastating buzz, however it has a
long duration 4 hours, but a repeat for sure, the strain has really "grown on me." Its just an all-around good
strain, now if it took 55-60 days it would be history, its speed to harvest is a big consideration.-Budm Green Spirit is a short resiny 8 week strain that crystals up nicely and has a real bomb taste. The only
drawback I see is the mold susceptibility trait inherited from its Skunk#1 forefathers.-Mcgee
containing this alkaloid is not difficult to
perform and is perhaps one of the most rewarding alchemical processes that one
can attempt.
The chemicals required for this process are readily available and
their purchase arouses no suspicion or interest on the part of Government
agencies.
The equipment employed is not expensive or particularly complicated
or can be constructed very easily from ordinary household items. The entire
process can be carried out in any kitchen in the matter of hours by following the
instructions below and in the final stages one can verify the success of the
procedure by actually watching the crystals of mescaline precipitate in the
solution. One kilo (2.2 lbs) of dried peyote buttons may yield between 10 and 60
grams of pure white needle crystals of mescaline depending on the potency of
the plants used. On average the yield is Whatisthesativaindicapercentageofhimalayangoldmarijuana about 20 grams. The usual underground
price of a kilo of dried peyote ranges between $125 and $250 (25 to 50 cents per
button). From indians in the southwestern USA the price is closer to $50 (10
cents per button). The street price for a gram of pure mescaline is $20 to $30 - if
one is lucky enough to find it. One can obtain from a kilo of dried peyote $200 to
$1200 worth of mescaline. If San Pedro is employed on may anticipate a yield of
3 to 12 grams of mescaline per kilo of dried cactus. One can legally purchase a
kilo of dried San Pedro for $5 to $10 and from it extract $60 to $250 worth of pure
mescaline.
Grind a kilo of the dried cactus, place this in a large pressure cooker, cover with
distilled water, and boil for 30 minutes. Strain the liquids and save them. Return
the pulp to the pot, add more water and boil again for 30 minutes. Strain the
liquids and combine them with the first strainings. Repeat this process about five
times or until the pulp no longer has a bitter taste.
Discard the pulp and reduce
the volume of the combined strainings by boiling in an open pot. Do not use
aluminum ware. When the liquids have been concentrated to the thickness of
cream (about one quart), stop the boiling and stir in 400 grams of sodium
hydroxide (lye). This makes the mescaline more soluble in benzene and less in
water. If a large separatory funnel is available pour the liquids into it and add
1600 ml of benzene. Shake the funnel well for five minutes and let it stand for two
hours.
If a separatory funnel is not available the process can be carried out in a
one gallon jug with a siphon attached.
After standing for 2 hours the water layer will settle to the bottom and the
benzene layer will float to the top. seeds+ Between the two layers will be a thin emulsion
layer of mixed water and benzene. Drain off the water and emulsion layers if you
are using a separatory funnel or siphon off the benzene layer if you are using the
makeshift jug-siphon apparatus. Be certain that neither the water or Whatisthesativaindicapercentageofhimalayangoldmarijuana emulsion
layers get into the benzene layer when separating. If any of these layers d
“This Indica dominant strain was created by backcrossing a male cross of ShivaSkunk from Sensi and Princess'
brother (a JH f2) back to the ShivaSkunk mother. In "cubing" terms that would mean that your plants are
ShivaSkunk.75. Another grower I sent them to liked them a lot too. I'm glad you're having such excellent
success with my strains!” – MrSoul
"I got NL#5 never had any problems with cloning, also if its real NL#5 (which is Pure NL) it has almost no smell
at all which is great if ya grow indoors.
The ones I've seen really fill out at the end of the flowering cycle, it
sometimes looks like the yield will be marginal and then in the last couple of weeks--bam! I have found this
with most indica strains, usually they do not fill out till
How To Grow Marijuana From Seeds the last 2-3 weeks of flowering.
NL is a great indoor
strain, one of my fav's too." -Unknown"I got NL5 never had any problems with cloning, also if its real NL5 (which is Pure NL) it has almost no smell
at all which is great if ya grow indoors. The ones I've seen really fill out at the end of the flowering cycle, it
sometimes looks like the yield will be marginal and then in the last couple of weeks--bam! I have found this
with most indica strains, usually they do not fill out till the last 2-3 weeks of flowering. NL is a great indoor
strain, one of my fav's too." -Unknown
hydroponics
s are well mixed in the spore
syringe. Often, it takes several tries to get the spores fully broken apart
and well mixed.
If the spores in the print have been dried and are not fresh, it is best to
wait six hours to use the spore syringe. The spores need to rehydrate. If
your in a hurry, the spores can still rehydrate in the culture jars.
How to Make a Spore Print
Once you have a mature mushroom, you are in a position to make a
spore print and use it to continue cultivation of mushrooms. The cap
should be harvested when the mushroom cap has become flat or is
starting to invert.
Sterility is key. Adaptation-25 Be careful not to do anything that will
compromise the sterility of your spore print. The typical procedure is
to cut the stalk off of a mature mushroom very close to the cap. A
sterilized knife or razor blade is used to do this. The cap is then laid on
a sterile piece of tissue paper or card stock and a small glass set over it.
The glass is needed for two reasons. First, it keeps the spore print
insulated from airborne contaminates.
Secondly, it helps keep the
humidity high so the mushroom cap can continue to live and drop its
spores. One note of caution. Some humidity usually needs to be
(10 of 15) [5/1/2002 6:54:20 PM]
How To Grow Magic Mushrooms The Magic Mushroom Growers Guide (page 3)
allowed to escape. You want the environment inside the glass to be
slightly less humid than the environment in which the mushroom was
grown.
If you have problems getting a cap to drop its spores, try using
a piece of paper for the print that fits entirely inside the glass and
spreading out a wash cloth flat on the table. Let the edge of the glass
seal to the wash cloth instead of the paper.
This will usually allow
enough humidity to escape to cause the cap to drop spores.
If everything goes well, after a day or two the cap will drop its spores.
Adaptation-26 There will be a purple-brown dust underneath the cap.
These are the spores.
Eye glass lens paper is good source of sterile tissue paper. A box of
waxy tissue paper that deli's use to pick up donuts and rolls is another
excellent source of sterile tissue paper. Card stock (such as a recipe
card) is a bit easier to use later when you want to prepare a spore
syringe, but you have to expend the extra effort up front to sterilize it.
To use card stock, place in a 425 degree F. oven for 15 minutes. Let it
cool with a glass over it before you place the cap on it.
Once you have a spore print on the paper, remove the glass and cap.
Fold the spore print in half and seal the edges so air can not get in. A
piece of scotch tape on each side will do nicely. The spores will stay
viable for 18 months if they are kept in a cool, dry and dark spot. If
you place a small amount of desiccant in the bottom of a film container
and place a cotton ball on top of the desiccant, you have an ideal
container to keep the spore print. The cotton ball will keep the
desiccant from touchis are well mixed in the spore
syringe. Often, it takes several tries to get the spores fully broken apart
and well mixed.
If the spores in the print have been dried and are not fresh, it is best to
wait six hours to use the spore syringe.
The spores need to rehydrate. If
your in a hurry, the spores can still rehydrate in the culture jars.
How to Make a Spore Print
Once you have a mature mushroom, you are in a position to make a
spore print and use it to continue cultivation of mushrooms. The cap
should be harvested when the mushroom cap has become flat or is
starting to invert.
Sterility is key. Adaptation-25 Be careful not to do anything that will
compromise the sterility of your spore print.
The typical procedure is
to cut the stalk off of a mature mushroom very close to the cap. A
sterilized knife or razor blade is used to do this. The cap is then laid on
a sterile piece of tissue paper or card stock and a small glass set over it.
The glass is needed for two reasons. First, it keeps the spore print
insulated from airborne contaminates. Secondly, it helps keep the
humidity high so the mushroom cap can continue to live and drop its
spores.
One note of caution.
hydroponic Some humidity usually needs to be
(10 of 15) 5/1/2002 6:54:20 PM]
How To Grow Magic Mushrooms The Magic Mushroom Growers Guide (page 3)
allowed to escape. You want the environment inside the glass to be
slightly less humid than the environment in which the mushroom was
grown. If you have problems getting a cap to drop its spores, try using
a piece of paper for the print that fits entirely inside the glass and
spreading out a wash cloth flat on the table. Let the edge of the glass
seal to the wash cloth instead of the paper. This will usually allow
enough humidity to escape to cause the cap to drop spores.
If everything goes well, after a day or two the cap will drop its spores.
Adaptation-26 There will be a purple-brown dust underneath the cap.
These are the spores.
Eye glass lens paper is good source of sterile tissue paper.
A box of
waxy tissue paper that deli's use to pick up donuts and rolls is another
excellent source of sterile tissue paper.
Card stock (such as a recipe
card) is a bit easier to use later when you want to prepare a spore
syringe, but you have to expend the extra effort up front to sterilize it.
To use card stock, place in a 425 degree F. oven for 15 minutes. Let it
cool with a glass over it before you place the cap on it.
Once you have a spore print on the paper, remove the glass and cap.
Fold the spore print in half and seal the edges so air can not get in. A
piece of scotch tape on each side will do nicely. The spores will stay
viable for 18 months if they are kept in a cool, dry and dark spot. If
you place a small amount of desiccant in the bottom of a film container
and place a cotton ball on top of the desiccant, you have an ideal
container to keep the spore print. The cotton ball will keep the
desiccant from touchis are well mixed in the spore
syringe. Often, it takes several tries to get the spores fully broken apart
and well mixed.
If the spores in the print have been dried and are not fresh, it is
What Is The Sativa Indica Percentage Of Himalayan Gold Marijuana best to
wait six hours to use the spore syringe.
The spores need to rehydrate. If
your in a hurry, the spores can still rehydrate in the culture jars.
How to Make a Spore Print
Once you have a mature mushroom, you are in a position to make a
spore print and use it to continue cultivation of mushrooms. The cap
should be harvested when the mushroom cap has become flat or is
starting to invert.
Sterility is key. Adaptation-25 Be careful not to do anything that will
compromise the sterility of your spore print. The typical procedure is
to cut the stalk off of a mature mushroom very close to the cap. A
sterilized knife or razor blade is used to do this. The cap is then laid on
a sterile piece of tissue paper or card stock and a small glass set over it.
The glass is needed for two reasons. First, it keeps the spore print
insulated from airborne contaminates. Secondly, it helps keep the
humidity high so the mushroom cap can continue to live and drop its
spores. One note of caution. Some humidity usually needs to be
(10 of 15) 5/1/2002 6:54:20 PM
How To Grow Magic Mushrooms The Magic Mushroom Growers Guide (page 3)
allowed to escape. You want the environment inside the glass to be
slightly less humid than the environment in which the mushroom was
grown. If you have problems getting a cap to drop its spores, try using
a piece of paper for the print that fits entirely inside the glass and
spreading out a wash cloth flat on the table. Let the edge of the glass
seal to the wash cloth instead of the paper. This will usually allow
enough humidity to escape to cause the cap to drop spores.
If everything goes well, after a day or two the cap will drop its spores.
Adaptation-26 There will be a purple-brown dust underneath the cap.
These are the spores.
Eye glass lens paper is good source of sterile tissue paper. A box of
waxy tissue paper that deli's use to pick up donuts and rolls is another
excellent source of sterile tissue paper. Card stock (such as a recipe
card) is a bit easier to use later when you want to prepare a spore
syringe, but you have to expend the extra effort up front to sterilize it.
To use card stock, place in a 425 degree F. oven for 15 minutes. Let it
cool with a glass over it before you place the cap on it.
Once you have a spore print on the paper, remove the glass and cap.
Fold the spore print in half and seal the edges so air can not get in. A
piece of scotch tape on each side will do nicely. The spores will stay
viable for 18 months if they are kept in a cool, dry and dark spot. If
you place a small amount of desiccant in the bottom of a film container
and place a cotton ball on top of the desiccant, you have an ideal
container to keep the spore print. The cotton ball will keep the
desiccant from touchis are well mixed in the spore
syringe.
Often, it takes several tries to get the spores fully broken apart
and well mixed.
If the spores in the print have been dried and are not fresh, it is best to
wait six hours to use the spore syringe. The spores need to rehydrate. If
your in a hurry, the spores can still rehydrate in the culture jars.
How to Make a Spore Print
Once you have a mature mushroom, you are in a position to make a
spore print and use it to continue cultivation
Mighty Mite of mushrooms. The cap
should be harvested when the mushroom cap has become flat or is
starting to invert.
Sterility is key. Adaptation-25 Be careful not to do anything that will
compromise the sterility of your spore print. The typical procedure is
to cut the stalk off of a mature mushroom very close to the cap. A
sterilized knife or razor blade is used to do this. The cap is then laid on
a sterile piece of tissue paper or card stock and a small glass set over it.
The glass is needed for two reasons.
First, it keeps the spore print
insulated from airborne contaminates. Secondly, it helps keep the
humidity high so the mushroom cap can continue to live and drop its
spores. One note of caution. Some humidity usually needs to be
(10 of 15) 5/1/2002 6:54:20 PM
How To Grow Magic Mushrooms The Magic Mushroom Growers Guide (page 3)
allowed to escape. You want the environment inside the glass to be
slightly less humid than the environment in which the mushroom was
grown.
If you have problems getting a cap to drop its spores, try using
a piece of paper for the print that fits entirely inside the glass and
spreading out a wash cloth flat on the table. Let the edge of the glass
seal to the wash cloth instead of the paper. This will usually allow
enough humidity to escape to cause the cap to drop spores.
If everything goes well, after a day or two the cap will drop its spores.
Adaptation-26 There will be a purple-brown dust underneath the cap.
These are the spores.
Eye glass lens paper is good source of sterile tissue paper.
A box of
waxy tissue paper that deli's use to pick up donuts and rolls is another
excellent source of sterile tissue paper. Card stock (such as a recipe
card) is a bit easier to use later when you want to prepare a spore
syringe, but you have to expend the extra effort up front to sterilize it.
To use card stock, place in a 425 degree F. oven for 15 minutes. Let it
cool with a glass over it before you place the cap on it.
Once you have a spore print on the paper, remove the glass and cap.
Fold the spore print in half and seal the edges so air can not get in. A
piece of scotch tape on each side will do nicely. The spores will stay
viable for 18 months if they are kept in a cool, dry and dark spot. If
you place a small amount of desiccant in the bottom of a film container
and place a cotton ball on top of the desiccant, you have an ideal
container to keep the spore print. The cotton ball will keep the
desiccant from touchi
The only side effect reported by the subjects taking 5-HTP was stomachache, of which there were 41 instances during the entire three-year trial. In the placebo group, there were only 10 instances of stomachache, but also 118 instances of nausea and 78 of abdominal pain. This is not inconsistent with the very few side effects other studies have reported by those taking 5-HTP. These results may be
Cannabis Grow Plante Cannabis explained by 5-HTP's ability to reduce hypersensitivity to pain. Moreover, in the study, eosinophilia (elevation of the special white blood cells associated with inflammation) was not reported in
Paradiseseeds Hanf Seeds the 5-HTP group; in the control group, there was one case. I grew this last year outdoors. about 5' tall at harvest, lots of short side branches with plenty of buds. yield
was about 4 oz. of average quality weed. excellent hashy taste which peaked at about 1 month of curing and
then started to decline. high was average and didn't last very long. maybe due to accidental pollination.
susceptible to bud mold in high humidity.” dr.atomic “Northern lights #2 = originally a Hindu Kush X Thai cross. It was selectively inbred and developed into a stable
almost all Kush type cross that is mostly indica.”
“I haven't done #5, but # 2 (Oasis) was great. Most people say that the NL strains have little or no taste or
smell, but my experience with #2 was that it had an oniony, garlicky smell and taste. The buzz was it.
Couch-lock, but surprisingly psychoactive, given indica's reputation. I don't think you can go wrong with a strain
that highly touted.” - Skunkman “BC Big Bud is a stabilized 65% indica/35% sativa, the Dutch Big Bud (Sensi) is all indica. BC Big Bud has
tremendous resin, its the crystally bud on the cover of the Cannabis Culture #18 (Steve Kubby header), and a
citrusy scent. Usually only available in clone, (hence the crosses, its usually the female in those Romulan x BC
Big Bud or Mikado x BC Big Bud), it is now available in seed (pure) at $50 CN/$40 US for 10 seeds. Giant seeds,
largest I have (not that that information has meaning, seed size has no relevance despite what mythology
persists about them). Very nice smoke, the Dutch Big Bud can be a good yielder like BC Big Bud but the high is
superior in the BC Big Bud version. The leaves in the BC Big Bud variety are more sativa like.” – Marc Emery
Cannabis Cultivo Northern Lights
“pure Indica 88/89/90
An absolute must for the indoor grower! For the last couple of years the Northern Lights® has dominated the
various Harvest Festivals. Through selective breeding we have succeeded in producing one of the most powerful
plants in the world. On
Homegrow top of that, we have developed a strain highly adapted for indoor growing: compact,
powerful with a good yield and exceptional resin production. The most lucrative plant for the indoor grower.
Flowering: 45-50 days.
Height: 100-125 cm.
Yield: up to 125 gr.” – Sensi Seed Bank catalog